Tuning Channels; Setting The Channel Tuning Mode; Tuning To The Next Programmed Channel - Toshiba 19CV100U Owner's Manual

Input labeling example:
The screen below is an example of how you could
label the inputs if you connected a VCR to Video,
a Video Recorder to HDMI 1, and a DTV set-top
box to HDMI 2. Also note that the ColorStream
HD input is labeled "Hidden", which means that
input will be skipped over when
To clear the input labels:
1
From the Preferences menu, press
to select Input Labeling and then press
2 Highlight Reset and then press
34
Chapter 6: Using the TV's features
is pressed.
or
.
.

Tuning channels

Setting the Channel Tuning Mode

This feature allows you to choose how tuning will
be handled for analog and digital channels when
the TV is in Antenna mode.
Note: To use this feature, the Input
Configuration must be set to Antenna (
Page 28).
The channel tuning mode has three options.
Mode Description
Both analog and digital channels can
Standard
be tuned normally.
Digital channels will have priority
when manually entering a channel
number using the Channel Number
Auto
buttons (0-9) on the remote control,
(Default)
analog channels can still be tuned by
or , if available.
Digital Only digital channels can be tuned.
1
From the Setup menu, press
select Installation and then press
2
Press or to highlight Terrestrial, and
then press or
Tuning Mode.
3
Press or to select your desired mode.
Note: Even if the Channel Tuning Mode is
set to Digital, analog channel 3 will still be the
default channel to prevent the initial case
where no digital channels have been found in
prior channel scans.
Tuning to the next programmed
channel
To tune to the next programmed channel:
on the remote control or PLAY/
Press or
CHANNEL or STOP/CHANNEL
TV control panel.
Note: This feature will not work unless you
program channels into the TV's channel
memory ( Page 29).
or to
.
to select Channel
on the