Connect Using Windows 7 And Wps - D-Link DWA-123 User Manual

D-Link DWA-123 User Manual
Wi-Fi Protected Setup (WPS) System is designed for easy setup of security-enabled Wi-Fi networks. It is recommended to have the access point or wireless router nearby
during setup. For more information on WPS, visit the Wi-Fi Alliance website at www.wi-fi.org.
"Push Button Configuration" (PBC) is a button on the adapter that after pressed connects you to other WPS-enabled devices. A connection can be established by pressing
the button on the DWA-123 and then pressing the physical button on the access point or wireless router within 120 seconds. If the wireless access point or router does not
have a physical button located on the device, it should have a 'Virtual button' on it's configuration. For more information about the Virtual button of a Wireless access point
or router refer to the unit's manual of contact the Vendor.
1. To connect to your network, press the WPS button on the adapter
and hold for 2 seconds until the wizard screen appears.

Connect using Windows 7 and WPS

2. Press the WPS button located on your access point or router to
continue.
3. After pressing both buttons a window will appear stating to 'Please
push the WPS button on your router', 'Discovering push
button device' and lastly 'Connecting...' After 120 seconds the
DWA-123 should be connected to your wireless network.
Page 11