Standby Mode (Energy Saving); Setting The Coffee Volume - Zanussi CKZ39-BL User Manual

Standby mode (Energy saving)

This appliance is equipped with an energy saving
function. It goes into standby automatically after
15 minutes (factory default) if it is not in use.
Exiting stand-by mode
The appliance is set by default to enter standby
mode after 15 minutes of non-use.
Press the ON/OFF button to exit the standby mode.

Setting the coffee volume

Setting the volume of the small cup
The coffee volume of the small cup is set by
default for a flow of approximately 25 seconds.
Follow the steps below to change the factory
setting.
Place a cup on the drip grid, insert the capsule
adapter. Press and hold the small cup button.
Release once the desired volume is reached. The
new level of coffee volume is stored.
Programmable flow time: 10 to 90 seconds.
32 www.zanussismallappliances.nl www.zanussismallappliances.be www.zanussismallappliances.fr
Cancelling and reactivating the default stand-by
mode
To cancel the default standby, unplug the power
cord from the power outlet.
Press the small cup and large cup buttons
simultaneously, then plug the power cord into the
power outlet.
The ON/OFF button lights up, release your fingers.
Press the small cup button, the indicator light on
the small cup button switches off; the default
standby mode is cancelled.
To reactivate the default standby mode, repeat the
same procedure.
Setting the volume of the large cup
The coffee volume of the large cup is set by
default for a flow of approximately 47 seconds.
Follow the steps below to change the factory
setting.
Place a cup on the drip grid, insert the capsule
adapter. Press and hold the large cup button.
Release once the desired volume is reached. The
new level of coffee volume is stored.
Programmable flow time: 10 to 90 seconds.