Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Huawei pBTS3701
Summary of Contents for Huawei pBTS3701
- Page 1 Huawei Proprietary Copyright © Huawei Technologies Co., Ltd.
-
Page 3: About This Chapter
Intended Audience The intended audiences of this document are: BS installer Administration engineer System maintenance engineer Field maintenance engineer Data configuration engineer Update History Version Update History 01(2008-09-24) Initial release. Issue () Huawei Proprietary Copyright © Huawei Technologies Co., Ltd. - Page 4 1 pBTS3701 User Guide Organization 1.1 Introduction to the pBTS3701 The pBTS3701 is a compact integrated indoor BTS. It receives and transmits radio signals to enable communications between the WiMAX network and the MS/SS. Huawei Proprietary Issue () Copyright © Huawei Technologies Co., Ltd.
-
Page 5: Gps Antenna
1 pBTS3701 User Guide 1.1 Introduction to the pBTS3701 The pBTS3701 is a compact integrated indoor BTS. It receives and transmits radio signals to enable communications between the WiMAX network and the MS/SS. 1.1.1 Components of the pBTS3701 This describes the console, GPS antenna, and power adapter of the pBTS3701. -
Page 6: Power Adapter
1 pBTS3701 User Guide Figure 1-2 GPS antenna of the pBTS3701 The GPS antenna of the pBTS3701 is used to receive GPS clock signals, which are used as the guarantee the synchronization of the pBTS3701. Power Adapter Figure 1-3 shows the power adapter of the pBTS3701. - Page 7 1 pBTS3701 User Guide Button At the top left of the pBTS3701, there is a RST button used to reset the pBTS3701. Ports Figure 1-5 shows the ports of the pBTS3701. Figure 1-5 Ports of the pBTS3701 Table 1-1 lists the ports of the pBTS3701.
- Page 8 Power supply to the pBTS3701 is functional. No power is supplied to the pBTS3701. 1.1.3 Cables of the pBTS3701 This describes the cables of the pBTS3701. The pBTS3701 requires two kinds of cables: the power cable and the Ethernet cable. Huawei Proprietary Issue () Copyright ©...
-
Page 9: Installation Position
This describes the power cable of the pBTS3701. 1.1.3.2 Ethernet Cable of the pBTS3701 This describes the Ethernet cable of the pBTS3701. The Ethernet cable is used to connect the pBTS3701 with a LAN switch, through which the connection with the ASN-GW is realized. -
Page 10: Pin Assignment
For the Ethernet cable used to transmit user traffic, one end is connected to the TRAN port on the pBTS3701, and the other end to the LAN switch. For the one used to perform local maintenance is connected to the ETH port, and the other end to the computer for local maintenance.