32
en | Installation material and tools
5
Installation material and tools
This section describes installation material such as cables, connectors and tools.
Recommedations
–
–
–
Warning!
Do not exceed the bend limitations of system network cables (DCNM‑CBxxx):
!
The minimum bend radius of the system network cable is a 35 mm radius.
5.1
DCNM-CBCPLR Cable couplers
Cable couplers can be used:
–
–
–
–
–
Cable couplers are delivered in a box that contains 6 cable couplers. They can be used for all
types of DICENTIS cables.
Mounting
To secure the DCNM-CBCPLR to a flat surface, insert two 2.5 mm screws in the existing holes
on the flaps (1). You can also fix the DCNM-CBCPLR by wrapping a cable tie around the device
using the existing recess (2) to prevent side movement.
2021.01 | V2.2 |
Always use manufacturer specified installation products, materials and tools.
In general, use different cable ducts for the system network cables, audio cables and
mains supply cables.
In public areas where people can touch or move above the connectors and cables, use
metal protection covers.
to extend cables,
in a floor pod as break-out box,
as an interface between DICENTIS cable and "standard" CAT-5E cable combined with a
separate power cable,
to insert power locally to the participant devices,
to switch the system on by using two cable couplers and a switch.
Hardware Installation Manual
DICENTIS
Bosch Security Systems B.V.