Huawei IVS1800 User Manual page 36

IVS1800 Video Management System
User Manual
5.
6.
7.
Step 2 Set the IP address for the IPC6325 camera.
Issue 02 (2021-01-27)
Settings
Enable TLS 1.1 or TLS 1.2.
Set Use Pop-up Blocker to Disable.
Choose Settings > Network > Platform Connection > Second Protocol
Parameters, and select Enable ONVIF.
Figure 4-9 ONVIF parameters
Remove the network cable from the PC to the PoE port on the ETH gateway.
Connect the PC to the LAN1 port on the ECC800-Pro using a network cable,
and reconnect the network cable between the smart ETH gateway and the
LAN2 port on the ECC800-Pro.
Copyright © Huawei Technologies Co., Ltd.
4 Commissioning the IVS1800
Procedure
NOTE
You must enable TLS 1.1 or TLS 1.2
when the Hypertext Transfer Protocol
Secure (HTTPS) protocol is used to
access the camera. Otherwise the
camera WebUI cannot be accessed.
1. Choose Tools > Internet
Options.
The Internet Options dialog box
is displayed.
2. Click the Advanced tab.
3. Select Use TLS 1.1 or Use TLS 1.2.
4. Click OK.
1. Choose Tools > Internet
Options.
The Internet Options dialog box
is displayed.
2. Click the Security tab.
3. Select Internet.
4. Click Custom level.
The Security Settings-Internet
Zone dialog box is displayed.
5. Set Use Pop-up Blocker to
Disable.
6. Click OK.
31