Table of Contents
Advertisement
CRS1
4 Self diagnosis and special mode setting
This unit is equipped with functions for checking and inspecting namely: Self-Diagnostic and Test Mode.
4.1.
Special Mode Table
Item
Mode Name
Description
Self -Diagnostic
To
Mode
diagnostic checking for
main unit.
CD Test Mode
To enter into checking the
reliability of changer unit.
CD Auto
To check the CD auto
Adjustment
adjustment
FLOCK,
CLVS.
CD Changer
To
Reliability Test
reliability of CD Changer
(CRS1)
Unit.
(For
refer to section 4.1.1)
Doctor Mode
To enter into Doctor
Mode for checking of
various items and
displaying EEPROM and
firmware version.
Cold Start
To
activate
upon next AC power up.
Changer
To check the function
Reliability Test
operation of changer unit.
(For
refer to 4.1.1)
FL Display Test To
segments
segments will light up and
LED will blink at 0.5
second interval)
enter
into
self
result
for
TLOCK
and
determine
the
more
information,
1.
2.
1. All segments will light up for 1 second.
2. The Check Sum of EEPROM and firmware
version will be display.
* ROM correction
** Firmware version No:
cold
start
more
information,
check
the
FL
display
(All
FL Display
32
Key Operation
Front Key
1. Select [
] for TAPE mode (Ensure no
tape is inserted).
2. Press and hold [
]button for 3
seconds follow by [
To exit, press
unit or remote control.
1. Select [
] for CD mode.
2. Press and hold [
] button for 3
seconds follow by [
To exit, press
unit or remote control.
In CD Test Mode:
1. Press [0] button on the remote control.
To exit, press
unit or remote control.
In Self-Diagnostic Mode:
1. Select [
] for CD mode.
2. Press [
] button.
To exit, press
unit or remote control.
(The tray will return to PLAY position and then
power off)
In any mode:
1. Press [
] button on main unit follow
by [4] and [7] on remote control.
To exit, press [ENTER] button on remote
control or
button on main unit
or remote control.
In doctor mode:
1. Press [4] button on remote control.
To exit, press [ENTER] button on remote
control or
button on main unit
or remote control.
In doctor mode:
1. Press [DISC] on remote control.
To exit, press [ENTER] button on remote
control or
button on main unit
or remote control.
In doctor mode:
1. Press [PROGRAM] button on remote
control.
].
button on main
].
button on main
button on main
button on main
Advertisement
Table of Contents
