Before Use; Overview; Features - Panasonic AU-XPD3P Operating Instructions Manual

Before Use

• Install the Thunderbolt drivers onto your personal computer from our website.
Refer to the installation manual on the website for information on how to install
the drivers.
For the latest information on drivers, visit the "Service and Support" page on the
following website.
http://pro-av.panasonic.net/
• The P2 drive (AU-XPD3) may become warm during use, but this is not a
malfunction.

Overview

The AU-XPD3 (referred to as "P2 drive" in these instructions) is a single-slot
drive for reading and writing P2 content on P2 cards (one card at a time) when
connected to a Windows or Mac computer through a Thunderbolt connection.
The P2 drive is capable of making high-speed transfers of clip data shot with a
memory card camera-recorder for P2 cards to a personal computer (Windows/
Macintosh).
This device supports not only the transferring and copying of clips recorded on P2
cards, but also direct editing.

Features

• Single-slot P2 card drive with Thunderbolt 3 interface
• Allows high-speed data transfer through Thunderbolt 3
• Supports both Windows and Mac operating systems
• The P2 drive can be connected to a single personal computer in a daisy chain of
up to 6 devices
• Express P2 cards, P2 cards, and Memory Card Adapters can be used
u NOTE:
• For details on the Memory Card Adapter and microP2 card, refer to the operating
instructions supplied with each device.
E-8