Lenovo Moto One Hyper Service And Repair Manual
  1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Cell Phone
  5. Moto One Hyper
  6. Service and repair manual

Lenovo Moto One Hyper Service And Repair Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Moto One Hyper
Lenovo Moto One Hyper
Level 2 – Service and Repair Manual

Advertisement

Table of Contents
loading

Related Manuals for Lenovo Moto One Hyper

Summary of Contents for Lenovo Moto One Hyper

  • Page 1 Moto One Hyper Lenovo Moto One Hyper Level 2 – Service and Repair Manual...

  • Page 2: Revision History

    Lenovo Moto One Hyper Level 2 – Service and Repair Manual EVISION ISTORY Revision Date Notes 11/25/2019 Initial Release. Lenovo Confidential Restricted: PAGE 2 Do not share without consent from Lenovo...

  • Page 3: Table Of Contents

    TOF Sensor Grommet Removal ....................... 46 Rear-Facing Flash Lens Removal..................... 47 Headset Jack Grommet Removal ..................... 48 Main PCB Graphite Removal ......................49 Main PCB Copper Foil Removal ....................... 50 Lenovo Confidential Restricted: PAGE 3 Do not share without consent from Lenovo...
  • Page 4 Primary MIC Grommet Assembly ...................... 90 Water Detection Label Assembly ...................... 91 Main PCB Thermal Pads Assembly ....................92 CPU Copper Pad Assembly ......................93 Main PCB Copper Foil Assembly ...................... 94 Lenovo Confidential Restricted: PAGE 4 Do not share without consent from Lenovo...
  • Page 5 Battery Inlay Adhesive Assembly ....................130 Finger Print Sensor Foam Assembly ....................132 Finger Print Sensor Assembly......................133 Battery Inlay Assembly ........................134 IMEI Label Assembly ........................137 Sim Tray Assembly ......................... 138 Lenovo Confidential Restricted: PAGE 5 Do not share without consent from Lenovo...

  • Page 6: List Of Tables

    Table 2. Assembly Exploded View Parts List ..................10 ABLE OF IGURES Figure 1. External Views ........................8 9 B F igure 2. Assembly Exploded View ....................10 Lenovo Confidential Restricted: PAGE 6 Do not share without consent from Lenovo...

  • Page 7: Safety Information

    Ensure screws and screwdrivers do not contact the Battery. Failure to adhere to Safety Critical Note(s) may increase risk of rupture, burning, or failure to function safely when used by the customer. Lenovo Confidential Restricted: PAGE 7 Do not share without consent from Lenovo...

  • Page 8: Introduction

    Lenovo Moto One Hyper Level 2 – Service and Repair Manual NTRODUCTION External Views Figure 1. External Views Lenovo Confidential Restricted: PAGE 8 Do not share without consent from Lenovo...

  • Page 9: Table 1. External Views Parts List

    Volume Key Power Key Battery Inlay Flash Lens Rear-Facing Camera Deco Rear-Facing Camera Ring Rear-Facing Camera Lens FPS Bezel Speaker Mesh USB Port Front Ring Middle Plane Sim Door Lenovo Confidential Restricted: PAGE 9 Do not share without consent from Lenovo...

  • Page 10: Main Exploded Views

    Defender FRU Mainboard ROW 4+128G DS Defender FRU Mainboard CN 6+128G DS ASSY,DTR BRD,Defender,REC PCBA,Defender Defender FRU REC PCBA CS Sub PCBA,Defender Defender FRU Sub BRD CS ASSY,FLX,Defender,ASM,Main FPC,Defenfer Lenovo Confidential Restricted: PAGE 10 Do not share without consent from Lenovo...
  • Page 11 HDW,TRAY,Defender,ASSY,SIM tray(Single S HDW,TRAY,Defender,ASSY,SIM tray(Dual SIM HDW,TRAY,Defender,ASSY,SIM tray(Dual SIM SHLD,CVR,Defender,METAL_BRACKET_FPS_BTB_ SHLD,CVR,Defender,METAL_CHASSIS_8M_DEFEN HDW,SCR,SCR, M1.0 x 0.20 x 1.4 Cross, BL HDW,SCR,Screws M1.2x0.25 x 1.7, SLVR SCR,SCREWS M1.4X0,3X3 Receiver,30ohm,50mW,8x9x3mm VIBR,LIN,R4xH3.25,0.205KHz,Vibrator,R4xH Lenovo Confidential Restricted: PAGE 11 Do not share without consent from Lenovo...
  • Page 12 DICUT,COND CLTH,CUSH, CONN, BAT,Defender DICUT,FOAM,Defender,CUSH, FPS Left GROM,CUST,Defender,GROM, TOF GROM,CUST,Defender,GROM,Mic1 sealing GROM,CUST,Defender,GROMl,Mic2 sealing GROM,CUST,Defender,Grommet_8M_Rear CAMR KYPD,LT FLM,Defender,LGF (Light GDE film THRM,COND,COP Foil,BX,Defender HTSK,HT SPRD,HT SPRD, GRPH, top CAR Lenovo Confidential Restricted: PAGE 12 Do not share without consent from Lenovo...

  • Page 13: Disassembly And Recovery

    Lenovo Moto One Hyper Level 2 – Service and Repair Manual ISASSEMBLY AND ECOVERY Disassembly and Recovery Map *Shaded parts may be eligible for parts recovery. Lenovo Confidential Restricted: PAGE 13 Do not share without consent from Lenovo...

  • Page 14: Tools Required For Disassembly

    Lenovo Moto One Hyper Level 2 – Service and Repair Manual Tools Required for Disassembly The following tools are required to disassemble the Moto One Hyper phone. Description Part # Picture/Drawing Battery Inlay/Display Removal Fixture MR-M2-001 Battery Inlay Removal Insert...
  • Page 15 Level 2 – Service and Repair Manual Description Part # Picture/Drawing SIM/SD Tray Removal Tool Black Stick Torque Driver Shim 4-00-5L-10000 PH00 Bit Torx T4 Bit Plastic Tweezers ESD Mat Wrist Strap Gloves Lenovo Confidential Restricted: PAGE 15 Do not share without consent from Lenovo...

  • Page 16: Sim Tray Removal

    Use the SIM Tray Removal pin to push into the SIM Tray hole. Press the SIM Tray removal tool to make it pop- out as shown. Use fingers to take out the SIM Tray. Lenovo Confidential Restricted: PAGE 16 Do not share without consent from Lenovo...

  • Page 17: Water Detection Label Inspection

    If the Water Detection Label (WDL) has been activated, the phone’s warranty no longer applies. Inspect the WDL inside the SIM Tray Slot for signs of activation. Use external light if needed. Lenovo Confidential Restricted: PAGE 17 Do not share without consent from Lenovo...

  • Page 18: Imei Label Removal

    Remove the IMEI Label only if necessary. After you remove it, you cannot reuse it. Use the Plastic Tweezer to remove the IMEI Label from the SIM tray. Lenovo Confidential Restricted: PAGE 18 Do not share without consent from Lenovo...

  • Page 19: Battery Inlay Removal

    Place the phone on the Heating Plate, with the Battery Inlay side down. Wait 10 minutes for the Battery Inlay Adhesive to warm up. Lenovo Confidential Restricted: PAGE 19 Do not share without consent from Lenovo...
  • Page 20 Remove the phone from the Heating Plate or the oven. // CAUTION // Wear protective gloves when handling heated phones. NOTE Perform the Battery Inlay removal procedure before the phone starts to cool off. Lenovo Confidential Restricted: PAGE 20 Do not share without consent from Lenovo...
  • Page 21 Fixture as shown. Place the Insert in the Battery Removal Fixture. Use an alignment pin to lock the Battery Inlay Removal Insert and the Display Removal Fixture as shown. Lenovo Confidential Restricted: PAGE 21 Do not share without consent from Lenovo...
  • Page 22 Slide the phone into the Battery Removal Fixture as shown. Center the phone in the Fixture. Use an alignment pin to lock the phone and the Battery Inlay Removal Insert as shown. Lenovo Confidential Restricted: PAGE 22 Do not share without consent from Lenovo...
  • Page 23 Wear protective gloves while handling heated phones. 12. Use the Heat Gun to warm the phone edges for about 3 minutes. Keep the Heat Gun in motion to avoid damaging the phone. Lenovo Confidential Restricted: PAGE 23 Do not share without consent from Lenovo...
  • Page 24 15. Use the Thin Plastic Spudger to break the suction on the suction cups attached to the Battery Inlay. 16. Use an alignment pin to release the phone from the Battery Inlay Removal Insert as shown. Lenovo Confidential Restricted: PAGE 24 Do not share without consent from Lenovo...
  • Page 25 17. After all the suction cups have been released, carefully slide the phone out of the Battery Removal Fixture. 18. Carefully lift the Battery Inlay from the Front Housing. Lenovo Confidential Restricted: PAGE 25 Do not share without consent from Lenovo...
  • Page 26 Do not insert the Thin Plastic Spudger more than 10 mm to prevent damaging internal components. Use the Thin Plastic Spudger to loosen or cut the adhesive holding the Battery Inlay. Lenovo Confidential Restricted: PAGE 26 Do not share without consent from Lenovo...
  • Page 27 Level 2 – Service and Repair Manual Move the Thin Plastic Spudger in the direction 1 to 4. //CAUTION// The highlighted frame is a weak area. Do not disassemble at this location. Lenovo Confidential Restricted: PAGE 27 Do not share without consent from Lenovo...
  • Page 28 Split the Battery Inlay from the phone. /// WARNING /// Use care not to disconnect the Fingerprint Sensor (FPS) Flex from the Battery Inlay Cover when removing the Front Housing. Lenovo Confidential Restricted: PAGE 28 Do not share without consent from Lenovo...

  • Page 29: Top Carrier Removal

    The screws cannot be reused after removal. Use the flat end of the Black Stick to lift the Top Carrier from the location as shown. NOTE Be careful with the Finger Print Sensor Flex. Lenovo Confidential Restricted: PAGE 29 Do not share without consent from Lenovo...

  • Page 30: Receiver Sub Board Removal

    The Receiver Sub Board can be recovered and reused after removal. Use the flat end of the Black Stick to remove the Earpiece Speaker Board from the location as shown. Lenovo Confidential Restricted: PAGE 30 Do not share without consent from Lenovo...

  • Page 31: Nfc Inlay Foam Removal

    NOTE After you remove the NFC Inlay Foam, you cannot reuse it. Use the Plastic Tweezer to remove the NFC Inlay Foam from the Top Carrier as shown. Lenovo Confidential Restricted: PAGE 31 Do not share without consent from Lenovo...

  • Page 32: Nfc Removal

    Use the Plastic Tweezer to remove the NFC from the Top Carrier as shown. Use the flat end of the Black Stick to remove the NFC from the Top Carrier as shown. Lenovo Confidential Restricted: PAGE 32 Do not share without consent from Lenovo...

  • Page 33: Battery Inlay Foam Removal

    Battery Inlay Foam Removal NOTE After you remove the Battery Inlay Foam, you cannot reuse it. Use the Plastic Tweezer to remove the Battery Inlay foam from the location as shown. Lenovo Confidential Restricted: PAGE 33 Do not share without consent from Lenovo...

  • Page 34: Top Carrier Graphite Removal

    NOTE After you remove the Top Carrier Graphite, you cannot reuse it. Use the Plastic Tweezer to remove the Top Carrier Graphite from the Top Carrier as shown. Lenovo Confidential Restricted: PAGE 34 Do not share without consent from Lenovo...

  • Page 35: Rear-Facing Camera Lens Removal

    The Rear-Facing Camera Lens can be recovered and reused after removal. Use the pointed end of the Black Stick to carefully disengage and push out the Rear-Facing Camera Lens from the location.as shown. Lenovo Confidential Restricted: PAGE 35 Do not share without consent from Lenovo...

  • Page 36: Speaker Box Removal

    /// WARNING /// The screws cannot be reused after removal. Use the flat end of the Black Stick to lift the Speaker Box as shown. Lenovo Confidential Restricted: PAGE 36 Do not share without consent from Lenovo...

  • Page 37: Speaker Box Copper Foil Removal

    After you remove the Speaker Box Copper Foil, you cannot reuse it. Use the Plastic Tweezer to remove the Speaker Box Copper Foil from the location as shown. Lenovo Confidential Restricted: PAGE 37 Do not share without consent from Lenovo...

  • Page 38: Rear-Facing Camera Removal

    Use care while lifting the FPC as there is adhesive inside. Use the flat end of the Black Stick to disengage the Rear-Facing Camera Flex from the location as shown. Lenovo Confidential Restricted: PAGE 38 Do not share without consent from Lenovo...

  • Page 39: 8M Rear Facing Camera Grommet Removal

    The 8M Rear Facing Camera Grommet can be recovered and reused after removal. Use the Plastic Tweezer to remove the 8M Rear Facing Camera Grommet from the location as shown. Lenovo Confidential Restricted: PAGE 39 Do not share without consent from Lenovo...

  • Page 40: Main Flex Removal

    Use the flat end of the Black Stick to disengage the Main Flex and use fingers to gently peel off the Main Flex as shown. Lenovo Confidential Restricted: PAGE 40 Do not share without consent from Lenovo...

  • Page 41: Main Pcb Connectors Removal

    Use the flat end of the Black Stick to carefully disengage the Display Flex BtB Connector as shown. Use the flat end of the Black Stick to carefully disengage the Front-Facing Camera as shown. Lenovo Confidential Restricted: PAGE 41 Do not share without consent from Lenovo...
  • Page 42 Lenovo Moto One Hyper Level 2 – Service and Repair Manual Use the flat end of the Black Stick to carefully disengage the Proximity Sensor as shown. Lenovo Confidential Restricted: PAGE 42 Do not share without consent from Lenovo...

  • Page 43: Coax Cable Removal

    Use the Plastic Tweezer to remove the Coax Cable from the Main PCB and Sub Board as shown. Use fingers to remove the Coax Cable from the pocket on the recess of the phone. Lenovo Confidential Restricted: PAGE 43 Do not share without consent from Lenovo...

  • Page 44: Main Pcb Removal

    /// WARNING /// The screw cannot be reused after removal. Use the flat end of the Black Stick to lift the Main PCB from the location as shown. Lenovo Confidential Restricted: PAGE 44 Do not share without consent from Lenovo...

  • Page 45: Water Detection Label Inspection

    If the Water Detection Label (WDL) has been activated, the phone’s warranty no longer applies. Inspect the WDL, which is visible on the Main PCB. Examine it for signs of activation. Lenovo Confidential Restricted: PAGE 45 Do not share without consent from Lenovo...

  • Page 46: Tof Sensor Grommet Removal

    NOTE The TOF Sensor Grommet can be recovered and reused after removal. Use the Plastic Tweezer to remove the TOF Sensor Grommet from the Main PCB as shown. Lenovo Confidential Restricted: PAGE 46 Do not share without consent from Lenovo...

  • Page 47: Rear-Facing Flash Lens Removal

    The Rear-Facing Flash Lens can be recovered and reused after removal. Use the Plastic Tweezer to remove the Rear- Facing Flash Lens from the Main PCB as shown. Lenovo Confidential Restricted: PAGE 47 Do not share without consent from Lenovo...

  • Page 48: Headset Jack Grommet Removal

    Headset Jack Grommet Removal NOTE The Headset Jack Grommet can be recovered and reused after removal. Use the Plastic Tweezer to remove the Headset Jack Grommet from the location as shown. Lenovo Confidential Restricted: PAGE 48 Do not share without consent from Lenovo...

  • Page 49: Main Pcb Graphite Removal

    Use the Plastic Tweezer to remove the Main PCB Graphite from the Main PCB as shown. Use the Plastic Tweezer to remove the Main PCB Graphite from the Main PCB as shown. Lenovo Confidential Restricted: PAGE 49 Do not share without consent from Lenovo...

  • Page 50: Main Pcb Copper Foil Removal

    After you remove the Main PCB Copper Foil, you cannot reuse it. Use the Plastic Tweezer to remove the Main PCB Copper Foil from the location as shown. Lenovo Confidential Restricted: PAGE 50 Do not share without consent from Lenovo...

  • Page 51: Cpu Copper Pad Removal

    CPU Copper Pad Removal NOTE After you remove the CPU Copper Pad, you cannot reuse it. Use the Plastic Tweezer to remove the CPU Copper Pad from the location as shown. Lenovo Confidential Restricted: PAGE 51 Do not share without consent from Lenovo...

  • Page 52: Thermal Pads Removal

    Thermal Pads Removal NOTE After you remove the Thermal Pads, you cannot reuse it. Use the Plastic Tweezer to remove the Thermal Pads from the location as shown. Lenovo Confidential Restricted: PAGE 52 Do not share without consent from Lenovo...

  • Page 53: Sub Board Removal

    /// WARNING /// The screw cannot be reused after removal. Use the flat end of the Black Stick to gently lift the Sub Board from the location as shown. Lenovo Confidential Restricted: PAGE 53 Do not share without consent from Lenovo...

  • Page 54: Water Detection Label Inspection

    If the Water Detection Label (WDL) has been activated, the phone’s warranty no longer applies. Inspect the WDL, which is visible on the Front Housing. Examine it for signs of activation. Lenovo Confidential Restricted: PAGE 54 Do not share without consent from Lenovo...

  • Page 55: Usb Grommet Removal

    USB Grommet Removal NOTE The USB Grommet can be recovered and reused after removal. Use the Plastic Tweezer to remove the USB Grommet from the Sub Board as shown. Lenovo Confidential Restricted: PAGE 55 Do not share without consent from Lenovo...

  • Page 56: Battery Removal

    Place the phone on the Hot Plate, with the Display side down. Wait 10 minutes for the adhesive to warm up. Lenovo Confidential Restricted: PAGE 56 Do not share without consent from Lenovo...
  • Page 57 Battery. Use fingers to carefully lift the Battery. Use the Plastic Tweezer to remove the Battery Connector Foam from the location as shown. Lenovo Confidential Restricted: PAGE 57 Do not share without consent from Lenovo...

  • Page 58: Vibrator Removal

    Remove the Vibrator only if necessary. After you remove it, you cannot reuse it. Use the pointed end of the Black Stick to gently disengage the Vibrator from the location as shown. Lenovo Confidential Restricted: PAGE 58 Do not share without consent from Lenovo...

  • Page 59: Primary Mic Grommet Removal

    Primary MIC Grommet Removal NOTE The Primary MIC Grommet can be recovered and reused after removal. Use the Plastic Tweezer to remove the Primary MIC Grommet from the location as shown. Lenovo Confidential Restricted: PAGE 59 Do not share without consent from Lenovo...

  • Page 60: Earpiece Speaker Removal

    Use the flat end of the Black Stick to lift the Earpiece Speaker from the location as shown. Remove the Earpiece Speaker from the phone. Lenovo Confidential Restricted: PAGE 60 Do not share without consent from Lenovo...

  • Page 61: 8M Rear-Facing Camera Steel Sheet Removal

    Use the Plastic Tweezer to remove the 8M Rear-Facing Camera Steel Sheet from the location as shown. Use the Plastic Tweezer to remove the 8M Steel Sheet Conductive Cloth from the location as shown. Lenovo Confidential Restricted: PAGE 61 Do not share without consent from Lenovo...

  • Page 62: Front-Facing Camera Bracket Removal

    Use the flat end on the Black Stick to split the Front-Facing Camera Bracket Flex from the Front Housing as shown. Use the Torque Driver with Philips PH00 Bit to remove the five screws as shown. Lenovo Confidential Restricted: PAGE 62 Do not share without consent from Lenovo...
  • Page 63 Lenovo Moto One Hyper Level 2 – Service and Repair Manual Use the flat end of the Black Stick to remove the Front-Facing Camera Bracket from the Front Housing as shown. Lenovo Confidential Restricted: PAGE 63 Do not share without consent from Lenovo...

  • Page 64: Front-Facing Camera Removal

    Level 2 – Service and Repair Manual Front-Facing Camera Removal NOTE The Front-Facing Camera can be recovered and reused after removal. Use fingers to remove the Front-Facing Camera in the direction as shown. Lenovo Confidential Restricted: PAGE 64 Do not share without consent from Lenovo...

  • Page 65: Front-Facing Camera Waterproof Bracket Removal

    Use the Torque Driver with Philips PH00 Bit to remove the two screws as shown. Use the Plastic Tweezer to remove the Front- Facing Camera Waterproof Bracket from the Front Housing as shown. Lenovo Confidential Restricted: PAGE 65 Do not share without consent from Lenovo...

  • Page 66: Secondary Mic Grommet Removal

    Secondary MIC Grommet Removal NOTE The Secondary MIC Grommet can be recovered and reused after removal. Use the Plastic Tweezer to remove the Secondary MIC Grommet from the location as shown. Lenovo Confidential Restricted: PAGE 66 Do not share without consent from Lenovo...

  • Page 67: Finger Print Sensor Removal

    The Finger Print Sensor Flex can be recovered and reused after removal. Use the flat end of the Black Stick to push out the Finger Print Sensor Flex from the Battery Inlay as shown. Lenovo Confidential Restricted: PAGE 67 Do not share without consent from Lenovo...

  • Page 68: Finger Print Sensor Foam Removal

    After you remove the Finger Print Sensor Foam, you cannot reuse it. Use the Plastic Tweezer to remove the Finger Print Sensor foam from the location as shown. Lenovo Confidential Restricted: PAGE 68 Do not share without consent from Lenovo...

  • Page 69: Finger Print Sensor Light Film Removal

    Light Film, you cannot reuse it. Use the flat end of the Black Stick to remove the Finger Print Sensor Light Film from the Battery Inlay as shown. Lenovo Confidential Restricted: PAGE 69 Do not share without consent from Lenovo...

  • Page 70: Parts Refresh

    Lenovo Moto One Hyper Level 2 – Service and Repair Manual ARTS EFRESH Tools Required for Parts Refresh The following tools are required for parts refresh of the Moto One Hyper phone. Description Part # Image Plastic Tweezers Black Stick...

  • Page 71: Battery Inlay Cleaning

    Use the ISP Alcohol and Cotton Swabs to remove all the adhesives on the Battery Inlay as shown. /// CAUTION /// Remove the adhesive carefully to avoid damage to the Battery Inlay. Lenovo Confidential Restricted: PAGE 71 Do not share without consent from Lenovo...

  • Page 72: Front Housing Cleaning

    Lenovo Moto One Hyper Level 2 – Service and Repair Manual Front Housing Cleaning Use the Cotton Swabs with ISP Alcohol to remove all the adhesives from the location as shown. Lenovo Confidential Restricted: PAGE 72 Do not share without consent from Lenovo...

  • Page 73: Speaker Box Cleaning

    Lenovo Moto One Hyper Level 2 – Service and Repair Manual Speaker Box Cleaning Use the Cotton Swabs with ISP Alcohol to remove all the adhesives from the location as shown. Lenovo Confidential Restricted: PAGE 73 Do not share without consent from Lenovo...

  • Page 74: Top Carrier Cleaning

    Lenovo Moto One Hyper Level 2 – Service and Repair Manual Top Carrier Cleaning Use the Cotton Swabs with ISP Alcohol to remove all the adhesives from the location as shown. Lenovo Confidential Restricted: PAGE 74 Do not share without consent from Lenovo...

  • Page 75: Main Pcb Cleaning

    And >45° placement is to avoid the alcohol or washer solvent flows into open the devices of PCBA, such as connectors, cassettes, etc. Lenovo Confidential Restricted: PAGE 75 Do not share without consent from Lenovo...

  • Page 76: Front Housing Cleaning

    Lenovo Moto One Hyper Level 2 – Service and Repair Manual Front Housing Cleaning Use Plastic Scraper to remove the most part of Thermal putty from the Front Housing. Lenovo Confidential Restricted: PAGE 76 Do not share without consent from Lenovo...

  • Page 77: Assembly

    Lenovo Moto One Hyper Level 2 – Service and Repair Manual SSEMBLY Assembly Map Lenovo Confidential Restricted: PAGE 77 Do not share without consent from Lenovo...

  • Page 78: Tools Required For Assembly

    Lenovo Moto One Hyper Level 2 – Service and Repair Manual Tools Required for Assembly The following tools are required to assemble the Moto One Hyper phone. Description Part # Picture/Drawing Black Stick Torque Driver Torx T4 Bit PH00 Bit...
  • Page 79 Lenovo Moto One Hyper Level 2 – Service and Repair Manual Description Part # Picture/Drawing Manual Roller Plastic Tweezers Tweezers Gloves or Finger Collets Lenovo Confidential Restricted: PAGE 79 Do not share without consent from Lenovo...

  • Page 80: Earpiece Speaker Assembly

    Defender FRU TPLCM Front HSG Assy SAN Defender FRU TPLCM Front HSG Assy TER Receiver,30ohm,50mW,8x9x3mm Use the Plastic Tweezer to place the Earpiece Speaker on the location aligning with the pins as shown. Lenovo Confidential Restricted: PAGE 80 Do not share without consent from Lenovo...

  • Page 81: Front-Facing Camera Waterproof Bracket Assembly

    Do not press or touch the middle part of the Front- Facing Camera Waterproof bracket. Use Torque Driver with Philips PH00 Bit to tighten the two screw as shown (0.5±0.05 kgf- cm). Lenovo Confidential Restricted: PAGE 81 Do not share without consent from Lenovo...

  • Page 82: Front-Facing Camera And Bracket Assembly

    Defender FRU Pop-up Camera Assy TER CS Use fingers to insert the Front-Facing Camera on the Front-Housing as shown. Make sure the Camera bracket is slide into the slot. Lenovo Confidential Restricted: PAGE 82 Do not share without consent from Lenovo...
  • Page 83 Use fingers to peel off the liner from the location as shown. Use fingers to lift the Front-Facing Camera FPC and insert the Front-Facing Camera motor module with the two pins aligned. Lenovo Confidential Restricted: PAGE 83 Do not share without consent from Lenovo...
  • Page 84 Make sure the two pins are passed through the two holes on the FPC as shown. 10. Use Torque Driver with Philips PH00 Bit to tighten the two screw as shown (0.5±0.05 kgf- cm). Lenovo Confidential Restricted: PAGE 84 Do not share without consent from Lenovo...
  • Page 85 12. Use fingers to peel off the liner from the location as shown. 13. Use fingers to attach the FPC with Front- Housing aligning with the two pins as shown. Lenovo Confidential Restricted: PAGE 85 Do not share without consent from Lenovo...

  • Page 86: 8M Rear-Facing Camera Steel Sheet Assembly

    Use fingers to place the Conductive cloth and peel off the liner as shown. Use the Plastic Tweezer to place the 8M Rear- Facing Camera Steel Sheet on the location as shown. Lenovo Confidential Restricted: PAGE 86 Do not share without consent from Lenovo...
  • Page 87 Lenovo Moto One Hyper Level 2 – Service and Repair Manual Use Torque Driver with Philips PH00 Bit to tighten the screw as shown (0.5±0.05 kgf-cm). Lenovo Confidential Restricted: PAGE 87 Do not share without consent from Lenovo...

  • Page 88: Vibrator Assembly

    Defender FRU TPLCM Front HSG Assy SAN Defender FRU TPLCM Front HSG Assy TER VIBR,LIN,R4xH3.25,0.205KHz,Vibrator,R4xH Use the Plastic Tweezer to place and secure the Vibrator on the location as shown. Lenovo Confidential Restricted: PAGE 88 Do not share without consent from Lenovo...

  • Page 89: Secondary Mic Grommet Assembly

    Defender FRU TPLCM Front HSG Assy SAN Defender FRU TPLCM Front HSG Assy TER GROM,CUST,Defender,GROMl,Mic2 sealing Use the Plastic Tweezer to place and secure the Secondary MIC Grommet on the location as shown. Lenovo Confidential Restricted: PAGE 89 Do not share without consent from Lenovo...

  • Page 90: Primary Mic Grommet Assembly

    Defender FRU TPLCM Front HSG Assy SAN Defender FRU TPLCM Front HSG Assy TER GROM,CUST,Defender,GROM,Mic1 sealing Use the Plastic Tweezer to place the Primary MIC Grommet on the location as shown. Lenovo Confidential Restricted: PAGE 90 Do not share without consent from Lenovo...

  • Page 91: Water Detection Label Assembly

    Use the Plastic Tweezer to place the Water Detection Label (WDL) on the Front-Housing as shown. Use the Plastic Tweezer to place the Water Detection Label (WDL) on the Front-Housing as shown. Lenovo Confidential Restricted: PAGE 91 Do not share without consent from Lenovo...

  • Page 92: Main Pcb Thermal Pads Assembly

    Defender FRU Mainboard CN 6+128G DS THRM,COND,THRM Pad, BQ Use the Plastic Tweezer to place and secure the Main PCB Thermal Pads on the Main PCB as shown. Lenovo Confidential Restricted: PAGE 92 Do not share without consent from Lenovo...

  • Page 93: Cpu Copper Pad Assembly

    Defender FRU Mainboard ROW 4+128G DS Defender FRU Mainboard CN 6+128G DS THRM,COND,COP slug, CPU Use the Plastic Tweezer to place and secure the CPU Copper Pad on the Main PCB as shown. Lenovo Confidential Restricted: PAGE 93 Do not share without consent from Lenovo...

  • Page 94: Main Pcb Copper Foil Assembly

    Defender FRU Mainboard ROW 4+128G DS Defender FRU Mainboard CN 6+128G DS HTSK,HT SPRD,copper_foil_cpu_bq_defender Use the Plastic Tweezer to place and secure the Main PCB Copper Foil on the Main PCB as shown. Lenovo Confidential Restricted: PAGE 94 Do not share without consent from Lenovo...

  • Page 95: Water Detection Label Assembly

    Defender FRU Mainboard ROW 4+128G DS Defender FRU Mainboard CN 6+128G DS DICUT,WATERPROOF,Waterproof LBL TMO Use the Plastic Tweezer to place the Water Detection Label (WDL) on the Main PCB as shown. Lenovo Confidential Restricted: PAGE 95 Do not share without consent from Lenovo...

  • Page 96: Main Pcb Graphite Assembly

    Graphite on the Main PCB and peel off the liner as shown. Use the Plastic Tweezer to place the Main PCB Graphite on the Main PCB and peel off the liner as shown. Lenovo Confidential Restricted: PAGE 96 Do not share without consent from Lenovo...

  • Page 97: Headset Jack Grommet Assembly

    Defender FRU Mainboard ROW 4+128G DS Defender FRU Mainboard CN 6+128G DS SEAL,MOIS,Rio M,Rubber, O- ring, HSJ Con Use the Plastic Tweezer to place the Headset Jack Grommet on the location as shown. Lenovo Confidential Restricted: PAGE 97 Do not share without consent from Lenovo...

  • Page 98: Battery Assembly

    Battery are free of foreign material. Ensure screws and screwdrivers do not contact the Battery. Place the Battery Adhesive on the location as shown and peel off the liner. Lenovo Confidential Restricted: PAGE 98 Do not share without consent from Lenovo...
  • Page 99 10 cycles to secure the Battery as shown. NOTE For each cycle roll the Manual Roller from top to bottom of the Battery and vice versa. NOTE Each cycle should last for 3 seconds. Lenovo Confidential Restricted: PAGE 99 Do not share without consent from Lenovo...

  • Page 100: Thermal Gel Assembly

    This procedure is only required when replacing the Main PCB or Front Housing. Thermal Gel Syringe size package and Needle Gauges description TDS SY-TP350 5ml can operate without dispensing tool. Lenovo Confidential Restricted: PAGE 100 Do not share without consent from Lenovo...
  • Page 101 When use SY-TP350 or Henkel LF350 suggest to use 16 gauge needle, When use Artic and Cooler Master suggest to use 18 gauge needle. It can be easier operate the gel volume. Lenovo Confidential Restricted: PAGE 101 Do not share without consent from Lenovo...
  • Page 102 Lenovo Moto One Hyper Level 2 – Service and Repair Manual Thermal Gel location method Add Thermal conductive gel on the two visual blocks as shown. Lenovo Confidential Restricted: PAGE 102 Do not share without consent from Lenovo...
  • Page 103 80~90%, thermal effect can be acceptable as shown. Use the 18-gauge needle (green color) for Artic and Cooler Master. Use the 16-gauge needle (black color) for SY- TP350/ Henkel LF350. Lenovo Confidential Restricted: PAGE 103 Do not share without consent from Lenovo...
  • Page 104 Heat conductive gel is extruded according to the amount of heat conductive gel. NOTE Needle must be replaced daily. NOTE Care not to exceed the mark line area while applying the Thermal gel. Lenovo Confidential Restricted: PAGE 104 Do not share without consent from Lenovo...
  • Page 105 Thermal Gel list that can be acceptable substitutes Brand Model MGY-OSSG- https://www.coolermaster.com/catalog/coolers/thermal-grease/mastergel-pro/ N15M-R1 https://www.coolermaster.com/catalog/coolers/thermal-grease/mastergel-maker/ MGZ-NDSG- N15M-R1 https://www.coolermaster.com/catalog/coolers/thermal-grease/ic-essential-e1/ RG-ICE1-TG15- Cool Master https://www.coolermaster.com/catalog/coolers/thermal-grease/ic-essential-e2/ RG-ICE2-TA15- https://www.coolermaster.com/catalog/coolers/thermal-grease/extreme-fusion- RG-EFX1- TG15-R1 Electrolube TCP400 Henkel LF3500 Lenovo Confidential Restricted: PAGE 105 Do not share without consent from Lenovo...

  • Page 106: Main Pcb Assembly

    SCR,SCREWS M1.4X0,3X3 Use fingers to place the Main PCB on the location as shown. Use Torque Driver with Philips PH00 Bit to tighten the screw as shown (0.7±0.1 kgf-cm). Lenovo Confidential Restricted: PAGE 106 Do not share without consent from Lenovo...

  • Page 107: Front-Facing Camera Btb Connector Adhesive Assembly

    Defender FRU Mainboard CN 6+128G DS DICUT,ADHS,Defender,Adh,CONN,FRNT CAMR Use the Plastic Tweezer to place the Front-Facing Camera BtB Connector adhesive and peel off the liner on the Main PCB as shown. Lenovo Confidential Restricted: PAGE 107 Do not share without consent from Lenovo...

  • Page 108: Rear-Facing Camera Assembly

    Defender FRU Mainboard ROW 4+128G DS Defender FRU Mainboard CN 6+128G DS MDL,CAMR,48M,64M PDAF,Defende;rear64M;LG MDL,CAMR,5M,8M,Defende;rear8M;L4H7FD0;Of Use fingers to place and secure the Rear- Facing Camera on the Main PCB as shown. Lenovo Confidential Restricted: PAGE 108 Do not share without consent from Lenovo...
  • Page 109 Use fingers to place and secure the Rear- Facing Camera on the Main PCB as shown. Use the Plastic Tweezer to place the Rear- Facing Camera Grommet on the location as shown. Lenovo Confidential Restricted: PAGE 109 Do not share without consent from Lenovo...

  • Page 110: Usb Grommet Assembly

    Reference # Sub PCBA,Defender Defender FRU Sub BRD CS SEAL,MOIS,Rio M,ORING_USB_WORKING_LAKE,S Use the Plastic Tweezer to place and secure the USB Grommet on the Sub Board as shown. Lenovo Confidential Restricted: PAGE 110 Do not share without consent from Lenovo...

  • Page 111: Sub Board Assembly

    Use fingers to place the Sub Board on the location as shown. Use the Torque Driver with Philips PH00 Bit to tighten the white screw as shown (0.7±0.1 kgf-cm). Lenovo Confidential Restricted: PAGE 111 Do not share without consent from Lenovo...

  • Page 112: Battery Btb Connector Foam Assembly

    Defender FRU Mainboard ROW 4+128G DS Defender FRU Mainboard CN 6+128G DS DICUT,COND CLTH,CUSH, CONN, BAT,Defender Use the Plastic Tweezer to place the Battery Btb Connector Foam on the Main PCB as shown. Lenovo Confidential Restricted: PAGE 112 Do not share without consent from Lenovo...

  • Page 113: Coax Cable Assembly

    Defender FRU Mainboard ROW 4+128G DS Defender FRU Mainboard CN 6+128G DS CBL,RF,RF CBL,BLK CBL,RF,RF CBL,WHT Use the Plastic Tweezer to place the black Coax Cable on the Sub Board as shown. Lenovo Confidential Restricted: PAGE 113 Do not share without consent from Lenovo...
  • Page 114 Use the Plastic Tweezer to place the white Coax Cable on the Main PCB as shown. Ensure the Coax Cable hoop is pressed into the wire groove and cannot be lifted. Lenovo Confidential Restricted: PAGE 114 Do not share without consent from Lenovo...
  • Page 115 Use fingers to place and secure the two Coax Cables in the pocket on the recess of the phone. NOTE Make sure the Black Coax Cable is placed above the White Coax Cable. Lenovo Confidential Restricted: PAGE 115 Do not share without consent from Lenovo...

  • Page 116: Main Flex Assembly

    Defender FRU Mainboard ROW 4+128G DS Defender FRU Mainboard CN 6+128G DS ASSY,FLX,Defender,ASM,Main FPC,Defenfer Use fingers to carefully place the Main Flex on the phone as shown, sticky side down. Lenovo Confidential Restricted: PAGE 116 Do not share without consent from Lenovo...

  • Page 117: Rear-Facing Camera Flash Lens Assembly

    Defender FRU Mainboard ROW 4+128G DS Defender FRU Mainboard CN 6+128G DS LENS,FLSH,Defender,Assy, rear FLSH lens Use the Plastic Tweezer to place the Rear-Facing Camera Flash Lens on the Main PCB as shown. Lenovo Confidential Restricted: PAGE 117 Do not share without consent from Lenovo...

  • Page 118: Tof Sensor Grommet Assembly

    Defender FRU Mainboard ROW 4+128G DS Defender FRU Mainboard CN 6+128G DS GROM,CUST,Defender,GROM, TOF Use the Plastic Tweezer to place the TOF Sensor Grommet on the Main PCB as shown. Lenovo Confidential Restricted: PAGE 118 Do not share without consent from Lenovo...

  • Page 119: Earpiece Speaker Board Assembly

    Board adhesive and peel off the liner on the location as shown. Use the Plastic Tweezer to place the Earpiece Speaker Board on the location and align with the pins as shown. Lenovo Confidential Restricted: PAGE 119 Do not share without consent from Lenovo...

  • Page 120: Rear-Facing Camera Lens Assembly

    Use the Plastic Tweezer to place the Rear- Facing Camera Lens adhesive and peel off the liner as shown. Use the Plastic Tweezer to place the Rear- Facing Camera Lens as shown. Lenovo Confidential Restricted: PAGE 120 Do not share without consent from Lenovo...

  • Page 121: Speaker Box Assembly

    Use fingers to place the Speaker Box on the location as shown. Use the Plastic Tweezer to place the Speaker Box Copper Foil on the location as shown. Lenovo Confidential Restricted: PAGE 121 Do not share without consent from Lenovo...
  • Page 122 Lenovo Moto One Hyper Level 2 – Service and Repair Manual Use Torque Driver with Torx T4 Bit to tighten the six screws as shown (0.9±0.1 kgf-cm). Lenovo Confidential Restricted: PAGE 122 Do not share without consent from Lenovo...

  • Page 123: Top Carrier Graphite Assembly

    HTSK,HT SPRD,HT SPRD, GRPH, top CAR Use the Plastic Tweezer to place and secure the Top Carrier Graphite and peel off the liner on the location as shown. Lenovo Confidential Restricted: PAGE 123 Do not share without consent from Lenovo...

  • Page 124: Nfc Assembly

    Top Carrier aligning with the pins as shown. Use the flat end of the Black Stick to press and secure the NFC on the location as shown. Lenovo Confidential Restricted: PAGE 124 Do not share without consent from Lenovo...

  • Page 125: Front-Facing Camera Deco Waterproof Adhesive Assembly

    Defender FRU TPLCM Front HSG Assy TER DICUT,PSA,Defender,PSA, CAMR deco, water Use the Plastic Tweezer to place the Front-Facing Camera Deco Waterproof adhesive and peel off the liner on the location as shown. Lenovo Confidential Restricted: PAGE 125 Do not share without consent from Lenovo...

  • Page 126: Top Carrier Assembly

    SCR,SCREWS M1.4X0,3X3 Use fingers to place the Top Carrier on the location as shown. Use the Torque Driver with Torx T4 Bit to tighten the nine screws (0.9±0.1 kgf-cm). Lenovo Confidential Restricted: PAGE 126 Do not share without consent from Lenovo...

  • Page 127: Nfc Foam Assembly

    Defender FRU TPLCM Front HSG Assy TER HSG,FRM,Defender,Assy, Top Carrier, 3D,I HSG,FRM,Defender,Assy,Top CAR,3D,RED Gra HSG,FRM,Defender,Assy,Top CAR,3D,Terraco DICUT,ADHS,Defender,Cusion, NFC-Inlay Use the Plastic Tweezer to place the NFC Foam on the Top Carrier as shown. Lenovo Confidential Restricted: PAGE 127 Do not share without consent from Lenovo...

  • Page 128: Light Film Assembly

    KYPD,LT FLM,Defender,LGF (Light GDE film Use the Plastic Tweezer to peel off the liner as shown. Use the Plastic Tweezer to place and secure the Light Film on the location as shown. Lenovo Confidential Restricted: PAGE 128 Do not share without consent from Lenovo...

  • Page 129: Side Key Cushion Assembly

    Defender FRU TPLCM Front HSG Assy ICE Defender FRU TPLCM Front HSG Assy SAN Defender FRU TPLCM Front HSG Assy TER Use fingers to place the Side Key Cushion on the Front-Housing as shown. Lenovo Confidential Restricted: PAGE 129 Do not share without consent from Lenovo...

  • Page 130: Battery Inlay Adhesive Assembly

    Place both the Battery Inlay Press Fixtures in the Fixture Press as shown. Use fingers to place the Battery Inlay on the top part of the Battery Inlay Press Fixture as shown. Lenovo Confidential Restricted: PAGE 130 Do not share without consent from Lenovo...
  • Page 131 Lenovo Moto One Hyper Level 2 – Service and Repair Manual Press down the handle of the Fixture Press for 5 minutes to secure the Battery Inlay firmly on the phone. Lenovo Confidential Restricted: PAGE 131 Do not share without consent from Lenovo...

  • Page 132: Finger Print Sensor Foam Assembly

    LENS,OTHR,Defender,Inlay,3D,Terracotta G LENS,OTHR,Defender,Inlay, 3D, Iceberg Gr LENS,OTHR,Defender,Inlay, 3D,Terracotta DICUT,FOAM,Defender,CUSH, FPS Left Use the Plastic Tweezer to place the Finger Print Sensor Foam on the Battery Inlay as shown. Lenovo Confidential Restricted: PAGE 132 Do not share without consent from Lenovo...

  • Page 133: Finger Print Sensor Assembly

    Use fingers to place the Finger Print Sensor adhesive and peel off the liner on the location as shown. Use the Plastic Tweezer to place the Finger Print Sensor on the Battery Inlay as shown. Lenovo Confidential Restricted: PAGE 133 Do not share without consent from Lenovo...

  • Page 134: Battery Inlay Assembly

    LENS,OTHR,Defender,Inlay, 3D, Iceberg Gr LENS,OTHR,Defender,Inlay, 3D,Terracotta FINGERPRT SCANNER,ET520,iceberg,Kerr FINGERPRT SCANNER,ET520,Magenta,Kerr FINGERPRT SCANNER,Defender,ET520,Terraco Use the Plastic Tweezer to place the Finger Print Sensor Flex on the location as shown. Lenovo Confidential Restricted: PAGE 134 Do not share without consent from Lenovo...
  • Page 135 Inlay and place the phone on the Battery Inlay as shown. Place the phone with another set of Battery Inlay Press Fixture, display side down. NOTE Use care not to break the Finger Print Sensor Flex. Lenovo Confidential Restricted: PAGE 135 Do not share without consent from Lenovo...
  • Page 136 Press down the handle of the Fixture Press for 5 minutes to secure the Battery Inlay firmly on the phone. Take the phone out from the Fixture Press. Lenovo Confidential Restricted: PAGE 136 Do not share without consent from Lenovo...

  • Page 137: Imei Label Assembly

    Defender FRU TPLCM Front HSG Assy SAN Defender FRU TPLCM Front HSG Assy TER LBL,IMEI Use the Plastic Tweezer to place the IMEI Label on the SIM tray as shown. Lenovo Confidential Restricted: PAGE 137 Do not share without consent from Lenovo...

  • Page 138: Sim Tray Assembly

    LENS,OTHR,Defender,Inlay, 3D, Iceberg Gr LENS,OTHR,Defender,Inlay, 3D,Terracotta Insert the SIM Tray in the transceiver as shown. Use finger to press the SIM Tray until it secures into the transceiver. Lenovo Confidential Restricted: PAGE 138 Do not share without consent from Lenovo...

Table of Contents