Configuring Wireless Network - D-Link DAP-1620 Quick Installation Manual

DAP-1620

Configuring Wireless Network

1. On the Wireless Network 2.4 GHz page, in the Network name field,
specify your own name for the wireless network or leave the value
suggested by the extender.
2. In the Password field, specify your own password for access to the
wireless network or leave the value suggested by the extender (see the
field Password on the back panel of the device).
3. If the extender is used as a Wi-Fi client, you can specify the same
parameters of the wireless network as specified for the network to which
you are connecting. To do this, click the USE button (available for the
Repeater mode).
4. You can restore the parameters of the wireless network specified before
resetting to factory defaults. To do this, click the RESTORE button.
5. Click the NEXT button.
6. On the Wireless Network 5 GHz page, specify needed settings for the
wireless network in the 5GHz band and click the NEXT button.
Quick Installation Guide
27