Recharging The Acer P600 Series Portable Navigator - Acer P600 Series User Manual

Recharging the Acer p600 Series Portable Navigator

Acer p600 Series Portabl e Navigator fundamentals
Recharging the Acer p600 Series Portable Navigator
Your Acer p600 Series Portable Navigator uses a rechargeable 1200 mAh Lithium Ion
battery (Certain models only). The status icon located on the top right corner of the
Main Menu panel indicates the level of the device's battery power.
If the battery level becomes low in the course of normal use, recharge the device.
Normally, you can use the wall charger to recharge your device.
Additionally, you can also use the Mini USB Sync and charge cable to recharge your
Acer p600 Series Portable Navigator. However, this may be difficult when there's no
available computer on hand. When your device battery is drained while on the road,
you can still recharge your device by using either the car charger cable bundled with
your device. Recharging time varies depending on type of charge, but a charge from
empty to full capacity is recommended at about 3.5 hours.
NOTE: If the battery level reaches very low status, the device will automatically turn off. In this
case, you have about 12 hours to recharge your device after which you risk losing all data on
the device's internal memory. In case all data is lost, the next time you power on the device
you will be prompted to restore the data.
Certain models can only be used with external power. In this case, your device should be
connected to external power (car charger, wall charger, etc) at all times when being used.
5