Installing Isa Cards - Acer V60N User Manual

1.9

Installing ISA Cards

Both PnP and non-PnP ISA cards require specific IRQs.
installing ISA cards, make sure that the IRQs required by these cards
are not previously assigned to PCI devices to avoid resource conflicts.
Follow these steps when installing ISA cards:
1. Turn off the system and remove all PnP cards installed, if any.
2. Turn on the system ,enter BIOS utility and set the Reset
Resource Assignment parameter to
data assigned to the PnP devices. Refer to section 2.4.5.
3. Turn off the system and install non-PnP ISA cards.
4. Turn on the system.
5. Use Windows 95 or ICU to manually assign the appropriate IRQs
to the cards. This ensures that BIOS will not use the resources
assigned to the non-PnP ISA cards.
BIOS detects and configures only PnP cards.
6. Turn off the system.
7. Install PnP ISA and PCI cards.
8. Turn on the system.
configures the PnP ISA and PCI cards with the remaining free
IRQs.
System Board
Yes to clear the resource
This time PnP BIOS automatically
When
1-17