Table of Contents
Advertisement
Setting Up
Removing/attaching the stand
The stand can be removed when storing the display on a rack or display shelf.
CAUTION
12
• Make sure to perform this step with at least two people.
• Use a flat, clear surface when attaching/detaching the stands.
• The display can tip over if the stand has not been attached.
• Avoid touching the screen during this step as it may damage it.
Detaching
1 Place the display with the screen facing down on a soft cloth or cushioning material that is larger than the
display.
2 Front stands (2): Remove the screws holding the stands (2 each).
Rear stands (4): Remove the screws holding the stands (1 each).
• Do not lose the removed screws. Do not use these screws for other purposes.
Attaching
1 Place the display with the screen facing down on a soft cloth or cushioning material that is larger than the
display.
2 Align the position of the stand and screw hole on the video display.
• Alight the convex part of the stand and concave part of the video display.
3 Front stands (2): Fasten the screws holding the stands (2 each).
Rear stands (4): Fasten the screws holding the stands (1 each).
Concave part
Rear
Screen side
Front stand
mounting screw hole
Concave part
Rear stand
Mounting screw
Convex part
Front stand
Convex part
Advertisement
Table of Contents
