Advertisement
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Diagonal Cutters
Philips screw driver
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1.
Cut and remove cable from antenna and cut connectors from cable end, treat coax as wire/cable
2.
Slide antenna to remove it from base
3.
Open the case of antenna by inserting screw driver in the holes near cable to remove PCB
4.
Remove metal piece from base by removing the small screw.
5.
6.
7.
8.
9.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
EL-MF877-00
Template Revision A
Tool Size (if
applicable)
medium
small
Page 2
Advertisement
