Washing and drying
Turn the programme selector
■
to the desired
programme,e.g.Cottons 60°C
– The display panel
alternately shows
2(Remaining time) and the
commended load and
thekg
If necessary, adjust the
■
temperature and the spin
speed and select any options
for your individualised
programme.
Press the ' (Drying) button to
■
set the drying options.
Load the laundry.
■
– Observe the maximum
load.
– Programme table.
Press theStart/Pause I
■
The drying programme that is
carried out is automatically
determined by the washing
programme, see the Programme
table.
Changing the programme
To change the programme:
Select a new programme.
■
Press the Start/Pause I
■
button.
The new programme starts.
Getting to know the appliance
End of the programme
The washing and drying
■
programmes are ended
automatically. "Ÿš appears on
the display panel.
– Turn the programme
selector to Off.
– Remove the washing from
the drum.
– Leave the door open to
allow the inside of the
washer-dryer to dry out.
– Turn off the tap (not
necessary on models with
Aqua-Stop).
Cancelling the programme
Press and hold button Start/Pause
I until ‹‹:‹‹ is displayed.
For washing programmes at high
temperatures:
Cooling down laundry: choose
■
à+0+Spin
Press the Start/Pause I
■
button.
For programmes at low
temperatures:
Choose p+0+Spin
■
Press the Start/Pause I
■
button.
If you cancel the Drying
programme, the laundry may still
be very hot.
en
29