Service Overview; System Configuration; Power Supply - Sony PCS-G50 Service Manual

1-1. System Configuration

PCS-G50/G50P (Communication System)
This system is composed of the PCS-PG50/PG50P (Com-
munication terminal) and PCSA-CG70/CG70P (Camera
unit).
. PCS-PG50/PG50P (Communication terminal)
. PCS-RG70 (Remote commander)
. PCS-AC19V6 (AC adaptor)
. PCSA-CG70/CG70P (Camera unit)
. PCS-A1 (MIC unit)
Option
. PCSA-B384S/B768S (ISDN unit)
. PCSA-DSB1S (Data solution box)
. PCS-A1 (Microphone)
. PCSA-A3 (Microphone)
. PCS-DS150 (Document stand)
. CTE-600 (Communication transducer)
. PCSA-SP1 (SIP software)
. PCSA-A7P4 (Microphones)
. PCSA-STMG70 (Stand)
. PCSA-STCG70 (Camera stand)
Exclusive Option
. PCSA-M3G50 (H.323 MCU software)
. PCSA-M0G50 (H.320 MCU software)
Service tool
. H.320 MCU10 copy software (for PCS-G50/G50P)
J-6560-100-A
. H.323 MCU10 copy software (for PCS-G50/G50P)
J-6560-110-A
PCS-G50/G50P
Section 1

Service Overview

1-2. Power Supply

In this system, the power is supplied to each device by the
AC adaptor connected to the PCS-PG50/PG50P.
Therefore, before repairing or replacing the parts, turn off
the power of the PCS-PG50/PG50P and disconnect the
power cord from the AC adaptor.
At the repair service, it is recommended to use the AC
adaptor or AC power cord that are supplied with the unit.
w
. Use the approved Power Cord (3-core mains lead)/
Appliance Connector/Plug with earthing-contacts that
conforms to the safety regulations of each country if
applicable.
. Use the Power Cord (3-core mains lead)/Appliance
Connector/Plug conforming to the proper ratings (Volt-
age, Ampere).
If you have questions on the use of the above Power Cord/
Appliance Connector/Plug, please contact your local Sony
Sales Office/Service Center.
w
Never use an injured power cord.
For customers in the North America (USA and
Canada)
Power cord, 125 V, 7 A (2.0 m): ! 1-757-562-61
For customers in European countries except the
United Kingdom
Power cord, 250 V, 2.5 A (0.75 m): ! 1-575-131-61
For customers in China
Power cord, 250 V, 2.5 A (0.75 m): ! 1-782-476-22
1-1