Using GSM/GPRS
Set [Maximum Port Speed] to [57600] (recom-
mended), then select [Advanced].
Enter the extra initialization commands, then
select [Change Default Preferences] - [Ad-
vanced].
NOTE
About the commands, refer to "Appendix
(GPRS AT commands)".
In the example at right, the settings predefine a
PDP context where CID = 1, PDP type = ip and
APN = internet.t-d1.de. Note that the shown here
APN represents the German network provider
T-D1 and needs to be replaced with the APN
address supplied by your own network provider.
Set the necessary settings and select [OK].
12