Cleaning The Trimmer - Panasonic ER‑GB37 Operating Instructions Manual

Rechargeable beard/hair trimmer
Hide thumbs Also See for ER‑GB37:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Cleaning the trimmer

• Clean the main body and the blade after each use.
(If not cleaned, the motion will become poor and the
sharpness will worsen.)
• Do not use thinner, benzine, alcohol or other
chemicals.
Doing so may cause failure, cracking or discoloration
of the main body.
Wipe the main body only with a soft cloth slightly
dampened with tap water or soapy tap water.
• Make sure that the main body is turned off.
Before cleaning
1. Remove the main body from
the AC adaptor.
2. Remove the comb attachment
from the main body.
3. Hold the main body, place
your thumb against the blades
and then push them away
from the main body.
14
Cleaning with water
1. Clean the trimmer, the blade
and the comb attachment
with running water.
• Rinse with water and
shake up and down
several times to remove
the water.
2. Wipe off the water with a
towel and let it dry naturally.
• It will dry faster with the
blade removed.
3. Apply the oil to the blade
after drying. (See page 15.)
4. Attach the blade and comb
attachment to the main body.

Advertisement

Table of Contents
loading

Table of Contents