Pioneer CB009GMFILCFHD Service Manual page 114

5 Remove the 1) Screw off the fixing
fan motor
2) Screw off the fixing
3) Remove room
4) Remove the sticker
5) Remove the below volute
6) Remove the fan motor
7) Disassemble the fan
8) Disassemble the fan
screws to remove the
rear cover board
screws to remove the
rear beam
temperature sensor
shell
wire from the electronic
control box
motor fixing clamps to
remove the fan motor
assembly and fan wheel
assembly
wheels, then you can
remove the fan motor
5 screws
Total four screws at the left side and right side
Press
Press the clips to take off the volute shell
Refer the operation of step2 of No.1
Take off the screw to remove the fan wheel
111
Rear cover board
Rear beam
Cut off the fastening
belt to take off the
room temperature
sensor
Stickers
Press
The fan motor
assembly and
fan wheel
assembly can be
removed after
took off the
2screws used to
fix the fan motor
holder.