Sony HT-S40R Operating Instructions Manual page 14

Mounting the Wireless
Amplifier on a Wall
1
Prepare two screws (not supplied)
that are suitable for the wall
mount holes on the bottom of the
wireless amplifier.
More than 30 mm (1 3/16 in)
Hole on the bottom of the wireless
amplifier
2
Fasten the screws on a wall as in
the illustration below.
1.5 mm to
2.5 mm
(approx.
1/16 in)
Attach the screws apart
from the floor at more than
170 mm (6 3/4 in) so that
the AC power cord (mains
lead) can be attached to the
wireless amplifier.
14
GB
4 mm (3/16 in)
5 mm
(7/32 in)
10 mm
(13/32 in)
102 mm
(4 1/8 in)
3
Hang the wireless amplifier on the
screws.
Align the holes on the bottom of the
wireless amplifier with the screws,
then hang the wireless amplifier on
the two screws.