Epson ELPSC35 Installation Manual page 16

Installation Guide
Attach the screen to the wall
See the User's Guide supplied with your projector to check the screen size and projection distance when
deciding where to install the screen.
a
Determine the position for the brackets
See the dimensions figure in the "Specifications Table".
"Specifications Table"
s
Install the brackets so that they do not come into contact with the springs on the back of the screen.
b
Attach the brackets to the wall
Use a level to check that the brackets are aligned horizontally, and then secure the brackets to the wall
with commercially available screws. (Two points x 4)
When using a wall that does not support screws, install a commercially available anchor.
The customer needs to contact a specialist to determine and obtain the necessary screws or anchors
in advance. p.4
s
c
The top two brackets hold up the screen.
The bottom two brackets offer additional support to prevent the screen from falling after
installation.
* Cross section image
Screen surface
Wall brackets
p.6
C
A
A
14
B
B