Using Your Refrigerator - AEG ARE5047XB User Manual

14 www.aeg.com

USING YOUR REFRIGERATOR

Refrigerators work by transferring heat from the food inside
to the outside air. This operation makes the back and sides
of the refrigerator feel warm or even hot particularly at start-
up and on warm days – this is normal.
Avoid placing food against the air vents in the refrigerator
as it affects efficient circulation. If the door is opened
frequently, a light frosting will occasionally occur on the
freezer's interior. This is normal and will clear after a few
days. If the freezer door is accidentally kept open, a heavy
frost will coat the inside walls and should be removed.
Your new refrigerator uses a high-speed compressor, along
with other energy-efficient components, which may make
unusual sounds and be more noticeable at night and
quieter times. These sounds simply indicate your
refrigerator is working how it should. They include:
• Compressor running noises;
• Air movement noise from the small fan motor;
• A gurgling sound, similar to water boiling;
• A popping noise, heard during automatic
defrosting; and
• A clicking noise, prior to compressor start-up.
Further details can be found in the
Troubleshooting Guide.
IMPORTANT
For bottom mount refrigerators (where freezer is below
the fresh food compartment):
• Ensure all freezer drawers and shelves are
pushed back completely to prevent them from
keeping the door open.
REMOVING FEATURES
AHC (Auto Humidity Control)
Auto Humidity Filter Cartridge
Auto Humidity Control automatically releases excess
moisture & maintains optimal humidity for your fresh
vegetables, maintaining the taste, texture and
freshness.
Recommended to replace filter once a year*
Replacing Filter Cartridge
Auto Humidity Filter is located at the back of the
crisper handle.
• Hold the tabs of the filter cartridge.
• Slide to the Right to release the filter.
• Replace a new filter and slide to the Left to lock in
place.
Freezer shelf
Twist and Serve Ice
Mounting the twist & serve dispenser to the other side of
the freezer.
Insert into the slot at the rear of the shelf Then engage into the front of the shelf
1. Refit the runner into the rear of the shelf on the right
hand side and then engage the front.
2. Fit the carriage by sliding it into the runners until the
front if the carriage engages with the shelf.
3. Refit the ice tray and ice bin.
Remove the freezer shelf
by lifting the catches on
the right and left underside
of the shelf to release the
shelf then pull the shelf
toward you.