Nokia 7368 Intelligent Services Access Manager ONT Product Manual page 56

G-2425G-B unit data sheet
G-2425G-B standards compliance
• G.984.3 support for dynamic bandwidth reporting
• G.984.3 support for FEC in both upstream and downstream directions
• G.984.3 support for multicast using a single GEM Port-ID for all video traffic
• G.984.4 and G.983.2 support for ONT management and provisioning
• IEEE 802.1p for traffic prioritization
• IEEE 802.1q for VLANs
• IEEE 802.3 (2012)
• IEEE 802.11 ac/b/g/n for Wi-Fi
• ITU-T G.711, G.722, G.723, G.726, G.729
• SIP RFC 3261
4.11.1 Energy-related products standby and off modes compliance
Hereby, Nokia declares that the G-2425G-B ONTs are in compliance with the essential
requirements and other relevant provisions of Directive 2009/125/EC together with Commission
Regulation (EC) No 1275/2008 and Commission Regulation (EC) No 801/2013.
The G-2425G-B ONTS qualify as equipment with high network availability (HiNA) functionality.
Since the main purpose of G-2425G-B ONTs is to provide network functionality with HiNA 7 days
/24 hours, the modes Off/Standby, Power Management, and Networked Standby are inappropriate.
For information about the type and number of network ports, see
interface capacity" (p. 47)
For information about power consumption, see
this chapter.
4.11.2 FCC statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
56
in this chapter.
4.7 "G-2425G-B detailed specifications" (p. 52)
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-48293-ACAA-TCZZA
7368 ISAM ONT
4.5 "G-2425G-B interfaces and
August 2020
in
Issue 4