Table of Contents
Advertisement
Function Descriptions
1. AUTO Function
Start: press "AUTO
run in automatic mode, and the air volume runs at the mode of "Lo
machine will run at different modes according to the room temperature(air volume automatically
at "Hi
" mode).
a.
Room temperature>24 ℃ degrees, the"CIR
b.
Room temperature<20 ℃ degrees, the"Heat
c.
20 ℃ degrees<room temperature<24 ℃ degrees, the "Dry Hot
d.
Timer：default setting is 1 hour, it is not changeable.
Stop: press the "ON/OFF
and the time display will disappear, and the machine stops automatically.
2. Ventilation Function
Start: press the "Vent
"Lo
" mode. Press the "Speed" button to inter-change the "Hi
button, enter the strong working state (running noise of the whole will be a corresponding increase), after
entering the HI
icon, LO
exit a strong state, the next will start according to the user's habits, automatic memory the previous
working condition.
Timer: the default setting is 2 hours, By pressing the button "Time-up-down" to select time duration.
The time could be set from 1 hour to 24 hours. The time counter will be showed on the "88" LED display.
The time selection will be recorded in memory when it is off, and will resume in next usage.
Under the mode, the inter-change of air volume between "Hi
time counting.
Stop: press the "ON/OFF
the time display will disappear, and the machine stops automatically.
3. Delay Vent Fumction
Start: press "Delay Vent
vent mode. It will stop after 15 minutes as default setting. Time could not be selected, and no display.
Stop: press "ON/OFF
4. Cool Function
Start: press "Dry Cool
on. You can choose "Hi
"Turbo
" button, enter the strong working state (running noise of the whole will be a corresponding
increase), after entering the HI
"Turbo
" key to exit a strong state, the next will start according to the user's habits, automatic
memory the previous working condition.
Timer: the default time is 4 hours. By pressing "TIME-UP-DOWN" button to select time duration. The
time can be set form 1 hour to 24 hours. The remaining time will be showed on the LED display. The
time selection will be recorded in memory when it is off, and will resume in your next usage.
Under the mode, the inter-change of air volume between "Hi
time counting.
Stop: press the "ON/OFF
off, and the time display will disappear, and the machine stops automatically.
:
" button, the "AUTO
" button or pre-set time runs over, "AUTO
:
" button , the "Vent
lit up at the same time, again according to the "Turbo
" button or pre-set time runs over, "Vent
:
" button, and the "Delay Vent
" button, and the default time run over, the machine will stop automatically.
:
" button to start with a "Hi
" or "Lo
" air volume by continuously press "SPEED
icon, LO
" button or pre-set time runs over, "Dry Cool
-09-
" indication light gets on, and the machine starts to
". After 20 seconds, the
" mode.
" mode.
" mode.
" indication light gets on, air volume will run the
" or "Lo
" and "Lo
" indication light gets on, it runs delay
" mode for operation and indication light gets
lit up at the same time, again according to the
" and "Lo
" indication light gets off,
" mode， Press "Turbo
" key to
" will not affect the
" indication light gets off, and
" button, Press
" will not affect the
" indication light gets
"
Advertisement
Table of Contents
