en Troubleshooting
Fault
E:18 or indicator for water
supply lights up.
1
E:22 lights up.
E:24 lights up.
E:25 lights up.
E:27 lights up.
1
Depending on the appliance specifications
48
Cause
Filters are soiled or blocked.
Wastewater hose is blocked
or kinked.
Siphon connection is still
sealed.
Cover of the wastewater
pump is loose.
Wastewater pump is
blocked.
Cover of the wastewater
pump is loose
Mains voltage is too low.
Troubleshooting
Re-insert the filter in the supply
7.
hose.
Screw the water connection back
8.
on.
Check the water connection for
9.
leaks.
Restore the power supply.
10.
Switch the appliance on.
11.
Clean the filters.
▶
→ "Cleaning filters", Page 43
Reposition the wastewater hose
1.
without kinks.
Remove residues.
2.
Check the connection to the siphon
▶
and open if necessary.
Secure the cover of the "Wastewa-
▶
ter pump " → Page 58 so it clicks
into position.
Clean the wastewater pump.
▶
→ "Clean wastewater pump",
Page 58
Secure the cover of the "Wastewa-
▶
ter pump " → Page 58 so it clicks
into position.
This is not a fault on the appliance.
Contact an electrician.
1.
Have the mains voltage and elec-
2.
trical installation checked by an
electrician.