System Cam - Panasonic AK-HRP1000G Operation Manual

16 SYSTEM CAM

Item
TALLY CONTROL Sets whether or not to notify the camera when there is a tally input from the <PREVIEW> connector.
TALLY INPUT Sets the camera to be notified of a tally input when [TALLY CONTROL] is set to "ON".
TALLY SIGNAL Displays the status of the tally input to the unit. "ON" is displayed when there is input, and "OFF" when there is
no input.
TALLY CONT MD Sets the control method for when a tally is input to the unit.
ROP Menu (during AJ-CX4000 Connection)
Setting details
- 30 -