Evacuating In Case Of Fire; Beware Of Exhaust Fumes; Precautions For Welding And Grinding - Hitachi ZW 100-G Workshop Manual

EVACUATING IN CASE OF FIRE

•
If a fire breaks out, evacuate the machine in the fol-
lowing way:
•
Stop the engine by turning the key switch to the
OFF position if there is time.
•
Use a fire extinguisher if there is time.
•
Exit the machine.

BEWARE OF EXHAUST FUMES

•
Prevent asphyxiation. Engine exhaust fumes can
cause sickness or death.
•
If you must operate in a building, be sure there is
adequate ventilation. Either use an exhaust pipe
extension to remove the exhaust fumes or open
doors and windows to bring enough outside air
into the area.
PRECAUTIONS
GRINDING
•
Welding may generate gas and/or small fires.
•
Be sure to perform welding in a well ventilated
and prepared area. Store flammable objects in a
safe place before starting welding.
•
Only qualified personnel should perform welding.
Never allow an unqualified person to perform
welding.
•
Grinding on the machine may create fire hazards.
Store flammable objects in a safe place before
starting grinding.
•
After finishing welding and grinding, recheck that
there are no abnormalities such as the area sur-
rounding the welded area still smoldering.
FOR WELDING
SAFETY
518-E01A-0393
509-E01A-0016
AND
523-E01A-0818
SA-26
SA-393
SA-016
SA-818