Advertisement
4.
ASSEMBLY AND USE
4.1. These units are heavy, obtain the help of at least one other person before attempting to unpack them.
(AP6612)
4.2. Attach the wheels to the bottom of the rollcab using 4 bolts, washers and spacers (if supplied) per wheel.
The braked swivel wheels should be mounted on the same end as the handle (left hand side), the normal swivel wheels
in the middle and the locked wheels at the far end (fig.1).
4.3. Mount the side mounted handle onto the cabinet and attach with 4 bolts and washers (fig.3).
(All units)
4.4. AP6610 or AP6601 can be placed on top of AP6612, alternatively all 3 units can be assembled together as in the picture
below.
4.5. To remove a drawer with roller sliders, pull the drawer completely out, press down the left tab and lift up the right tab, pull
drawer off the slides (fig.2). To reinstall the drawer, realign with the internal drawer slide and push until it locks in place.
IMPORTANT: To avoid tipping, open one drawer at a time and close and secure all drawers whilst moving the rollcab/
units.
4.6. Periodically lubricate wheel axles and tighten all nuts and bolts.
Fig.1
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
© Jack Sealey Limited
Fig.2
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business
Park, Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
Fig.3
www.sealey.co.uk
01284 757500
Web
sales@sealey.co.uk
01284 703534
email
AP6601, 6610, 6612 Issue: 1 - 30/11/12
Advertisement
