Cleaning And Maintenance - Beko HNS61210W User Manual

4

Cleaning and maintenance

Prior to cleaning and maintenance, unplug the appliance or
turn the main swich off or loosen the fuse that supplies the
hood.
1
Failure to comply with the provisions relating
to cleaning of the device and replacement
A
of filters may cause fire risks. It is therefore
recommended to comply with the guidelines
given herein. The manufacturer is not liable
for any damage to the engine or fires caused
by improper use.
Clean using only a cloth dampened with neutral liquid deter-
gent. Do not clean with tools or instruments. Do not use abra-
sive products. Do not use alcohol
4.1 Cleaning of Aluminium
Grease Filter
This filter captures oil particles in the air. You are recommended
2
to clean your filter every month under normal usage conditions.
First remove the grease filters for this process. Wash the fil-
ters with liquid detergent and rinse them with water and install
them back after they get dry. Aluminium grease filters may get
discolered as they are washed; this is normal and you don't
need to change your filter.
C
You can wash the Aluminium filter in the
dishwasher
10 / EN
4.2 Changing of Carbon Filter (Air
Circulation Mode)
The hood can be fitted with an active carbon filter. The carbon
filter is applied only in case the hood is not connected to the
3
vent duct.
In any case it is necessary to replace the carbon filter at least
every three months.
1x A
ø 100 mm
ø 120 mm
4
A
WARNING: The carbon filter is never
washed.
WARNING: Carbon filter is available from
Authorized Services.
Hood / User Manual