Table of Contents
Advertisement
Parameterization of the software
2. Open the settings menu (Tools > Properties).
Figure 4-2
3. Set the parameters in accordance with your requirements.
4. Click OK. Your parameters are saved in the properties.xml file in the program directory of
Parameter
Name
Meaning
Start/Stop scan
The RFID scan is controlled with the Start/Stop button of the
application.
The barcode scan is controlled by the trigger on the pistol
handle. The scan is performed for the duration of operation of
the trigger (5 seconds max.).
Timer scan
The RFID scan is controlled with the Start/Stop button of the
application.
The scan can be stopped and started more than once. The
elapsed time is visualized by a progress bar.
The barcode scan is controlled by the trigger on the pistol
handle. The scan is performed for the duration of operation of
the trigger (5 seconds max.).
Manual scan
The RFID scan and the barcode scan are controlled
simultaneously by the trigger on the pistol handle. The scan is
performed for the duration of operation of the trigger (5
seconds max.).
RF power
Read performance of the RFID module.
Working directory
Directory in which the read out data are saved in XML format.
Protocol
Transmission protocol used.
4-2
Properties menu
the application. The settings menu is exited.
Range of values
Yes
•
No
•
1 to 60 seconds
Yes
•
No
•
15 dBm to 27 dBm
Freely selectable.
Class1 Gen1
User application for RF610M Mobile Reader
Operating Instructions, Edition 12/2005, D0175-U001-A0-7618
Advertisement
Table of Contents
