Kenwood SoupEasy CBL01 Instructions Manual page 7

Safety
Read these instructions carefully and retain for
future reference.
Remove all packaging and any labels.
If the plug or cord is damaged it must, for safety
reasons, be replaced by Kenwood or an authorised
Kenwood repairer in order to avoid a hazard.
DO NOT touch the sharp blades. Handle the blades
with care to avoid injury when emptying the goblet,
removing the blade from the goblet and during
cleaning.
CAUTION: Avoid contact with steam coming out
of the spout area when pouring and out of the lid
during operation.
Caution: the outside of the goblet and motor unit
will get hot during use and will remain HOT after
the appliance is switched off. Always remove the
lid using the lid handle and lift and pour using the
goblet handle.
Be careful if hot liquid is poured into the appliance
as it can be ejected out of the appliance due to
sudden steaming.
Never use a damaged appliance. Get it checked or
repaired: see 'Service and Customer Care'.
Never leave the appliance unattended when it is
operating.
Do not fill below the 1 litre minimum level or exceed
the 1.5 litre maximum fill level marked on the inside
of the goblet.
CAUTION: Before removing the lid from the goblet
switch off and wait until the blades have completely
stopped.
Always switch off the appliance and disconnect
from the supply if it is left unattended and before
assembling, disassembling or cleaning.
Do not operate the appliance when empty or below
the minimum fill level.
Never let the top section of the motor unit, cord or
plug get wet.
Do not let excess cord hang over the edge of a table
or worktop or touch hot surfaces.
2