Nuclias Connect Introduction Nuclias Connect is D-Link’s centralized management solution for Small-to-Medium-Sized Business (SMB) networks. Nuclias Connect makes it easier to analyze, automate, configure, optimize, scale, and secure your network — delivering the convenience of an Enterprise-wide management solution, at an SMB price. Nuclias Connect gives you the financial and technical flexibility to expand from a small network to a larger one of up to 1,000 Access Points APs, while retaining a robust and centralized management system.
• Intuitive Interface • Multi-Tenant & Role-Based Administration • Payment Gateway (Paypal) Integration and Front-Desk Ticket Management For more information on how to use Nuclias Connect with DAP-3666, please refer to the Nuclias Connect User Guide. D-Link DAP-3666 User Manual...
Hexagon Socket Spanner (Security screw) y Two LAN Port Waterproof Enclosure y Grounding Wire Note: No PSU supplied. To power the units use a D-Link 802.3af PoE switch or the D-Link DPE-301GI,DPE-311GI PoE injector. System Requirements y IEEE 802.11n/g wireless clients (AP/bridge modes) Network Requirements y IEEE 802.11n/g wireless router or access point (client mode)
Ventilation for heat and humidity dissipation. Grounding Point Attach a ground wire to the conductor to connect the access point to a grounding electrode. Wall/Pole Mount Location used to mount on a wall or a pole location. D-Link DAP-3666 User Manual...
Connect to a switch or router via an Ethernet cable. or malfunctioning. Connect to a Power over Ethernet (PoE) switch or router Indicates that the DAP-3666 is LAN (PoE) Port Green (Solid) via an Ethernet cable. working properly. D-Link DAP-3666 User Manual...
Wireless Basics D-Link wireless products are based on industry standards to provide high-speed wireless connectivity that is easy to use within your home, business or public access wireless networks. D-Link wireless products provides you with access to the data you want, whenever and wherever you want it.
Method 2 - Power on by PoE kit. Method 1 - Powered by PoE switch 1. Connect one end of your Ethernet cable into the LAN1 (PoE) port on the DAP-3666 and then connect the other end to your PoE switch. D-Link DAP-3666 User Manual...
Page 11
3. Use the supplied power adapter. Connect the power adapter to the Power In receptor on the PoE adapter. 4. Connect the power cable to the power adapter and then connect the other end into a power outlet. D-Link DAP-3666 User Manual...
The key to maximizing wireless range is to follow these basic guidelines: 1. Keep the number of walls and ceilings between the D-Link device and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.
Log in to the Administration Web pages. The default login information is: Username: admin Password: admin The first login instance displays the System Settings window which requires a change in password. Additional settings include the System Time and System Country functions. D-Link DAP-3666 User Manual...
Enter to login. Most of the configurable settings are located in the left menu of the web GUI which contains section called Basic Settings, Advanced Settings and Status. D-Link DAP-3666 User Manual...
AP is booting up. Click the drop-down menu to select the desired Channel channel. The function is only available when Auto Channel Selection is Disable. Note: The wireless adapters will automatically scan and match the wireless settings. D-Link DAP-3666 User Manual...
Page 16
Select 802.1X if your network is using port-based Network Access Control. Use the drop-down menu to choose to enable or disable 802.11k/v/r 802.11k/v/r Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. Save D-Link DAP-3666 User Manual...
AP MAC Address network that will serve as bridges to wirelessly connect multiple networks. Click Scan to search for available wireless Site Survey networks, then click on the available network that you want to connect with. D-Link DAP-3666 User Manual...
Page 18
Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. Save D-Link DAP-3666 User Manual...
AP MAC Address network that will serve as bridges to wirelessly connect multiple networks. Click Scan to search for available wireless Site Survey networks, then click on the available network that you want to connect with. D-Link DAP-3666 User Manual...
Page 20
Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. Save D-Link DAP-3666 User Manual...
Will be explained in the next topic. “Wireless Authentication Security” on page 23 Check the box to enable the Wireless MAC Clone Enable function. Click the drop-down menu to select Auto or MAC Source Manual. D-Link DAP-3666 User Manual...
Page 22
When MAC Source is set to Manual, click Scan to find the MAC address to clone. MAC Address Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. Save D-Link DAP-3666 User Manual...
Configuration > Save and Activate. * Hexadecimal (HEX) digits consist of the numbers 0-9 and the letters A-F. ** ASCII (American Standard Code for Information Interchange) is a code that represents English letters using numbers ranging from 0-127. D-Link DAP-3666 User Manual...
Click the drop-down menu to select the cipher Cipher Type type for the WPA setting, type: Auto, AES, or TKIP. Enter the interval period in seconds in which the Group Key Update interval period is valid. Interval D-Link DAP-3666 User Manual...
Page 25
Periodical Key Change: Select the option to have each client negotiate an unique encryption key between the client and the access point. Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. Save D-Link DAP-3666 User Manual...
Page 26
Enter the shared secret to be used between the RADIUS Secret radius server and the DAP to authenticate. Click the drop-down menu to enable or disable Accounting Mode the accounting mode. Enter the IP address of the accounting server. Accounting Server D-Link DAP-3666 User Manual...
Page 27
Web User Interface Enter the accounting port. Accounting Port Enter the accounting secret. Accounting Secret Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. Save D-Link DAP-3666 User Manual...
Enter a DNS server IP address. This is usually the local IP address of your gateway/router. Click to save the updated configuration. Save To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-3666 User Manual...
In the Advanced Settings Section the user can configure advanced settings concerning Performance, Wireless Resource, Multi-SSID, VLAN, Intrusion, Schedule, Internal RADIUS Server, ARP Spoofing Prevention, Bandwidth Optimization, Captive Portal, DHCP Server, Filters and Traffic Control. The following pages will explain settings found in the Advanced Settings section in more detail. D-Link DAP-3666 User Manual...
The default (100) is recommended. Setting a higher beacon interval can help to save the power of wireless clients, while setting a lower one can help a wireless client connect to an access point faster. D-Link DAP-3666 User Manual...
Page 31
Click the drop-down menu to disable or enable the STP function. STP (Spanning tree) Click the drop-down menu to disable or enable the PMF function. Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. Save D-Link DAP-3666 User Manual...
Click the drop-down menu to disable or enable 11n Preferred the 11n Preferred function. The wireless clients with 802.11n protocol will have higher priority to connect to the device. The function is only available when Connection Limit is Enabled. D-Link DAP-3666 User Manual...
Page 33
RSSI lower than the specified threshold below. Click the drop-down menu to set the ACL RSSI Threshold. ACL RSSI Threshold Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. Save D-Link DAP-3666 User Manual...
WPA-Personal, WPA-EAP, or 802.1X. This function is only available when Enable Priority Priority is selected. Click the drop-down menu to select the priority level of the SSID selected. The function is only available when Enable Priority is checked. D-Link DAP-3666 User Manual...
Page 35
Periodical Key Change: Select the option to have each client negotiate a very unique encryption key between the client and the access point. Enter the variable in hours to set the interval. Time Interval When Security is set to WPA-Personal, enter a pass phrase in the corresponding field. PassPhrase D-Link DAP-3666 User Manual...
Page 36
Enter the IP address of the accounting server. Accounting Server Enter the accounting port. Accounting Port Enter the accounting secret. Accounting Secret Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. Save D-Link DAP-3666 User Manual...
Displays the name of the VLAN. VLAN Name Displays the untagged ports. Untag VLAN Ports Displays the tagged ports. Tag VLAN Ports Click Edit to edit the current VLAN. Edit Click Delete to delete the current VLAN. Delete D-Link DAP-3666 User Manual...
Configuration > Save and Activate. Displays the name of the port. Port Name Displays the tagged VID of the port. Tag VID Displays the untagged VID of the port. Untag VID Displays the PVID of the port. PVID D-Link DAP-3666 User Manual...
Member settings to the Mgmt (management) and LAN ports. The port configuration functions are also available for the defined 2.4GHz and 5GHz ports. Untagged ports are used for connecting to client devices, such as a computer host, while tagged ports are designated for VLAN trunk links. D-Link DAP-3666 User Manual...
MSSID ports S1 and S2 to 16 and 17, respectively y set switch port trunk native VLAN 1 for trunk port Click to save the updated configuration. Save To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-3666 User Manual...
AP. Alternatively, click the radio button to mark all new access points as valid or rogue. Click to save the updated configuration. Save To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-3666 User Manual...
Enter the beginning hour and minute, using a Start Time 24-hour clock. Enter the ending hour and minute, using a 24- End Time hour clock. Click to save the updated configuration. Save To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-3666 User Manual...
8 ~ 64. Click the drop-down menu to enable the Status internal RADIUS server status. Click to save the updated configuration. Save To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-3666 User Manual...
Click to delete all gateway entries. Delete All Click to edit the selected gateway entry. Edit Click to delete the gateway entry. Delete Click to save the updated configuration. Save To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-3666 User Manual...
Enter the limitation of the download speed in Downlink Speed either Kbits/sec or Mbits/sec for the rule. Enter the limitation of the upload speed in Uplink Speed either Kbits/sec or Mbits/sec for the rule. Click to create a defined rule. D-Link DAP-3666 User Manual...
Page 46
Click to remove the settings from the menu interface. Clear Click to edit the selected gateway entry. Edit Click to delete the gateway entry. Delete Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. Save D-Link DAP-3666 User Manual...
This option configures the Downstream Group DGAF: Addressed Forwarding. Choose enable to allow AP to forward downstream group- addressed frames. Choose enable to allow proxy ARP. Proxy ARP: Choose enable to allow Layer 2 Traffic L2TIF: Inspection and Filtering. D-Link DAP-3666 User Manual...
Specify name of venue. Choose from the drop Venue Name: down list a language used in the name. Specify a homogenous extended service set HESSID: (ESS) ID that can be used to identify a specific service provider network. D-Link DAP-3666 User Manual...
If the downlink speed is not known, set to 0. The uplink speed of the WAN connection set in WAN Metrics UL Speed: kbps. If the uplink speed is not known set to 0. D-Link DAP-3666 User Manual...
Identifies the availability of common IP Connection Capability: protocols (TCP, UDP, IPsec) and ports (21, 80, 443, 5060). Identifies the Hotspot venue operator. Operator Friendly Name: Bit set to indicate support for QoS mapping QoS Map: from 802.11 to external networks. D-Link DAP-3666 User Manual...
Specify OSU Network Access Identifier. OSU Nai: Choose the service description lagnuage from OSU Service drop down list. Specify the service provider’s Description: descrption of service offering. Choose icon language from drop down list. OSU Icon Language: D-Link DAP-3666 User Manual...
Page 52
OSU Icon Width: Spcify length of the icon, in pixels. OSU Icon Height: Specifiy icon file type, where the icon type is any mim-type OSU Icon Type: graphic format. Specify location of icon file. OSU Icon File Path: D-Link DAP-3666 User Manual...
URL of the website that will be used in the space provided. Click the drop-down menu to enable or disable IPIF Status the Captive Portal with its IP interface feature. Enter the VLAN Group ID. VLAN Group D-Link DAP-3666 User Manual...
Page 54
Enter a DNS server IP address. This is usually the local IP address of your gateway/router. Click to edit the selected entry. Edit Click to delete the selected entry. Delete Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. Save D-Link DAP-3666 User Manual...
IP address to the DAP-3666. y Dynamic IP (DHCP): The other fields will be grayed out. Please allow about 2 minutes for the DHCP client to be functional once this selection is made. D-Link DAP-3666 User Manual...
Page 56
Click to remove the settings from the menu interface. Clear Click to edit the selected entry. Edit Click to delete the selected entry. Delete Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. Save D-Link DAP-3666 User Manual...
IP address to the DAP-3666. y Dynamic IP (DHCP): The other fields will be grayed out. Please allow about 2 minutes for the DHCP client to be functional once this selection is made. D-Link DAP-3666 User Manual...
Page 58
Click to delete all passcode setting entries. Delete All Click to edit the selected entry. Edit Click to delete the selected entry. Delete Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. Save D-Link DAP-3666 User Manual...
IP address to the DAP-3666. y Dynamic IP (DHCP): The other fields will be grayed out. Please allow about 2 minutes for the DHCP client to be functional once this selection is made. D-Link DAP-3666 User Manual...
Page 60
Select the remote RADIUS server type. Currently, only SPAP will be used. Remote RADIUS Type Click to edit the selected entry. Edit Click to delete the selected entry. Delete Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. Save D-Link DAP-3666 User Manual...
IP address to the DAP-3666. y Dynamic IP (DHCP): The other fields will be grayed out. Please allow about 2 minutes for the DHCP client to be functional once this selection is made. D-Link DAP-3666 User Manual...
Page 62
Click to edit the selected entry. Edit Click to delete the selected entry. Delete Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. Save D-Link DAP-3666 User Manual...
IP address to the DAP-3666. y Dynamic IP (DHCP): The other fields will be grayed out. Please allow about 2 minutes for the DHCP client to be functional once this selection is made. D-Link DAP-3666 User Manual...
Page 64
Click the drop-down menu to select the connection type, options include: None or SSL/TLS. Connection Type Click to edit the selected entry. Edit Click to delete the selected entry. Delete Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. Save D-Link DAP-3666 User Manual...
Note: The Left space field indicates the available memory in Bytes on the device. Click to save the updated configuration. Save To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-3666 User Manual...
To download MAC bypass list file, click Download MAC File Download and to save the MAC bypass list. Click to save the updated configuration. Save To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-3666 User Manual...
Gateway network. Enter the Windows Internet Naming Service WINS (WINS) server address for the wireless network. WINS is a system that determines the IP address of a network computer that has a dynamically assigned IP address. D-Link DAP-3666 User Manual...
Page 68
Enter the lease time that the period of time before the DHCP server will assign new IP addresses. Lease Time (60 - 31536000 sec) Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. Save D-Link DAP-3666 User Manual...
Enter the DNS server address for your wireless network. Enter the domain name for the network. Domain Name Click to save the updated configuration. Save To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-3666 User Manual...
DHCP static IP address pool. The current corresponding DHCP-assigned Assigned IP Address static IP address of the device. Click to save the updated configuration. Save To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-3666 User Manual...
To download ACL list file, click Download and to Load ACL File to Local save the ACL list. Hard Drive Click to save the updated configuration. Save To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-3666 User Manual...
Guest: Disallows communication between wireless clients configured on the access point even when connected to the same or different SSIDs. Click to save the updated configuration. Save To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-3666 User Manual...
To download IP Filter list file, click Download Download IP Filter File and to save the IP filter list. Click to save the updated configuration. Save To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-3666 User Manual...
Enter the downlink bandwidth in Mbits per Downlink Bandwidth second. Enter the uplink bandwidth in Mbits per second. Uplink Bandwidth Click to save the updated configuration. Save To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-3666 User Manual...
Priority Click the drop-down menu to select the level of Other Traffic Priority priority for the selected rule. Click to save the updated configuration. Save To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-3666 User Manual...
When a rule is entered, it is added to the Traffic Manager Rules following index. Click Edit or Delete to alter the List current rule. Click to save the updated configuration. Save To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-3666 User Manual...
In the Status Section, users can monitor and view configuration settings of the access point. Here the user can also view statistics about client information, WDS information and more. The following pages will explain settings found in the Status section in more detail. D-Link DAP-3666 User Manual...
Displays the current CPU utilization. CPU Utilization Displays the current memory utilization. Memory Utilization Displays the current connection status. Connection Status Displays the current server IP address. Server IP Displays the current server port. Server Port D-Link DAP-3666 User Manual...
Authentication for the network. Displays the associated clients RSSI for the RSSI network. Displays the associated clients power saving Power Saving Mode mode for the network. Displays the associated clients information for System Info the network. D-Link DAP-3666 User Manual...
Displays the AP SSID for the network. Name Displays the AP MAC address for the network. Displays the AP authentication method for the Authentication network. Displays the AP signal for the network. Signal Displays the AP status for the network. Status D-Link DAP-3666 User Manual...
Dropped Packet Count Displays the received packet count. Received Packet Count Displays the received bytes count. Received Bytes Count Displays the dropped packet count. Dropped Packet Count Click Refresh to update the Ethernet traffic Refresh statistics list. D-Link DAP-3666 User Manual...
Displays the received decryption error count. Received Decryption Error Count Displays the received MIC error count. Received MIC Error Count Displays the received PHY error count. Received PHY Error Count Click Refresh to update the WLAN traffic Refresh statistics list. D-Link DAP-3666 User Manual...
Click to display the last View Log page. Last Page Click to display the page occurring before in Previous order. Click to display the page occurring after in order. Next Click to remove all listings from the View Log Clear page. D-Link DAP-3666 User Manual...
Retype the password entry to confirm the Confirm Password password. Click the drop-down menu to set email log Schedule schedule. Click to save the updated configuration. Save To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-3666 User Manual...
In the Maintenance Section the user can monitor and view configuration settings of the access point. Here the user can also view statistics about client information, WDS information and more. The following pages will explain settings found in the maintenance section in more detail. D-Link DAP-3666 User Manual...
It is highly recommended to create a password before configuring the settings. After any setting modification, the updated configuration must be saved to the device through the Configuration function, otherwise, the settings will not be saved to the firmware. D-Link DAP-3666 User Manual...
System Name is D-Link DAP-3666. Enter the physical location of the device, e.g. Location 72nd Floor, D-Link HQ. Enter the name of the multicast DNS. The MDNS Name default name is dap3666. Note: To save the new configuration settings to the firmware, click Configuration >...
Ping Control Settings Check the box to enable the ping control Status setting. Note: To save the new configuration settings to the firmware, click Configuration > Save and Activate, otherwise click Discard Changes to delete any setting change. D-Link DAP-3666 User Manual...
Click the drop-down menu to enable or disable Enable Nuclias Connect the Nuclias Connect. Note: To save the new configuration settings to the firmware, click Configuration > Save and Activate, otherwise click Discard Changes to delete any setting change. D-Link DAP-3666 User Manual...
This page allows the user to perform a firmware upgrade which is an essential tool that prevents future bugs and allows for new features to be added to this product. Please go to your local D-Link website to see if there is a updated firmware version available.
After you have a saved Nuclias Connect file, click Upload Nuclias Connect Choose File. Select the saved Nuclias Connect Network File file and click Open and Upload to upload the Nuclias Connect file. D-Link DAP-3666 User Manual...
Click the drop-down menu to designate the Daylight Saving Dates start/end date and time for daylight saving time. Click to save the updated configuration. Save To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-3666 User Manual...
Configuration allows the user to save and activate or discard the configurations done. y Save and Activate: Click Save and Activate to have configuration changes you have made to be saved across a system reboot. y Discard Changes: Click Discard Changes to discard the settings you have made. D-Link DAP-3666 User Manual...
Restore to Factory Default Settings: Click Restore to have all configuration parameters reset to their factory default values. All changes that have been made will be lost, even if you have issued a save. y Clear Language Pack: Click Clear to reset language to default settings. D-Link DAP-3666 User Manual...
Web User Interface Logout Click Logout to allow the user to safely log out from the access point’s web configuration. Click The current browser connection will be disconnected if you click here to logout. D-Link DAP-3666 User Manual...
Web User Interface Help The Help page is useful to view a brief description of the functions available on the access point in case the manual is not present. D-Link DAP-3666 User Manual...
Perform a Ping test to make sure that the DAP-3666 is responding. Go to Start > Run, type cmd, and then press Enter. At the DOS prompt, type ping 192.168.0.50. A successful ping will show four replies. Note: If you have changed the default IP address, make sure to ping the correct IP address assigned to the DAP-3666. D-Link DAP-3666 User Manual...
Page 98
If it is necessary, assign a Static IP Address to the wireless adapter. If you are entering a DNS Server address, you must also enter the Default Gateway Address. Remember that if you have a DHCP-capable router, you will not need to assign a static IP address. D-Link DAP-3666 User Manual...
Page 99
Troubleshooting What variables may cause my wireless products to lose reception? D-Link products let you access your network from virtually anywhere you want, however, the positioning of the products within your environment will affect its wireless range. Why does my wireless connection keep dropping? y If you are using 2.4 GHz cordless phones, X-10 equipment or other home security systems, ceiling fans, or lights, your wireless connection will...
Page 100
DHCP request on newly installed adapters. If you are connecting to a wireless network at a hotspot (e.g. hotel, coffee shop, airport), please contact an employee or administrator to verify their wireless network settings. D-Link DAP-3666 User Manual...
Page 101
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. 6. Click OK twice to save your settings. D-Link DAP-3666 User Manual...
Dimensions (L x W x H) * Please note that operating frequency ranges vary depending on the regulations of individual countries and jurisdictions. The DAP-3666 isn’t supported in the 5.25~5.35 GHz and 5.47 ~ 5.725 GHz frequency ranges in some regions. D-Link DAP-3666 User Manual...
Page 104
Part 15 certification. It is the responsibility of the operator and professional installer to ensure that only certified systems are deployed in the United States. The use of the system in any other combination (such as co-located antennas transmitting the same information) is expressly forbidden. D-Link DAP-3666 User Manual...
Page 105
De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. D-Link DAP-3666 User Manual...