Sealey MAC04 Instructions

thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instruction
manual
1. Safety
WarninG! Read instructions before use. Suitable for 12V operation only.
‰
WarninG! This compressor is capable of producing a high pressure. do not inflate any item beyond its maximum capacity.
‰
do not leave the unit unattended while in operation.
8
Check capacity and maximum pressure of inflatable before commencing inflation.
9
monitor the pressure gauge while in operation.
9
The gauge should be used as an indication of pressure only. We recommend the use of a dial pressure gauge for definitive reading.
9
locate compressor on an appropriate surface for use.
9
The 12V auxiliary plug (MAC04) must not be substituted with any other type of plug or electrical supply.
9
do not direct inflation hose connector head at yourself, others or animals.
8
do not carry by the hose, or pull the hose sharply from a valve.
8
do not pull the power cable from the vehicle accessory socket or battery terminal by the power lead.
8
do not get the compressor wet or use in the rain.
8
do not use the compressor for a task it was not designed to perform.
8
do not operate the compressor when you are tired, under the influence of alcohol, drugs or intoxicating medication.
8
do not operate the compressor if any parts are missing as this may cause failure or possible personal injury.
8
do not open the unit.
8
Keep children and non essential persons away from the inflation area.
9
Keep the compressor clean and in good condition.
9
Replace or repair damaged parts. Use recommended parts only. non authorised parts may be dangerous and will invalidate the
9
warranty.
2. introduCtion
A range of heavy-duty mini air compressors with delivery between 25ltr and 95ltr/min. Air output hose features quick release coupling. Suitable for
inflating tyres on lawnmowers, motorcycles, cars, vans and 4x4s and commercial vehicles. Supplied in a storage bag with high pressure hose with
screw-on connector and accessory kit including ball needle and adaptors for inflatables.
3. SPeCifiCation
e
Model no
Hose length
Power cord length
operating voltage
Tyre Inflation time
(175/70/R13 tyre)
maximum current
Air delivery
Power connection
Applications
maximum pressure
Weight
4. oPeration
WarninG! Ensure you have read and understood the safety instructions. Place the compressor on a sound, flat surface ensuring that
‰
the inflation air hose can reach the tyre valve.
4.1. Remove the valve cap and screw the air hose onto the tyre valve.
iMPortant: Inflation will only be effective if the connector head is fully fitted and secured onto the valve.
© Jack Sealey limited
tyre inflator/Mini air CoMPreSSorS 12V
heaVy duty
model no'S:
MaC04
1500mm
3mtr
12V
0-30psi in 139sec
13A
25ltr/min
Accessory plug
cars lawnmowers, motorcycles,
100psi
1.85kg
Original Language Version
MaC04, MaC05, MaC06, MaC07
MaC05
4500mm
3mtr
12V
0-30psi in 104sec
20A
50ltr/min
Battery clamps
cars, vans
150psi
2.91kg
MaC06
7500mm
3mtr
12V
0-30psi in 60sec 0-30psi in 45sec
33A
75ltr/min
Battery clamps Battery clamps
cars, vans, 4x4s cars, vans,4x4s
commercial vehicles
150psi
4.65kg
mAC04, MAC05, MAC06, MAC07 Issue:2 (H) - 08/03/19
MaC07
7500mm
3mtr
12V
40A
95ltr/min
150psi
6.58kg