Mitsubishi Electric AE-200A Instruction Book page 11

(1) To display the latest operation data
Click [Update] to display the latest operation data of the
unit with the specified address.
Note: Regardless of the start/end times that have been
specified, the latest data will be displayed.
Note: The units of measure for the temperature and
pressure selected in the initial setting will appear
below the data names. ([--] will appear for other types
of data.) This is also true for items (2) and (3) below.
(2) To display the start time data
Click [Display start time data] to display the operation
data of the selected unit at the specified start time.
Note: If the Operation Data Acquisition Mode is set to
[Normal], data for odd minutes will not be displayed.
(3) To display the operation data of the selected unit in a specified time range
Click [Display operation data] to display the operation
data of the selected unit in a specified time range.
This data will be displayed at a minimum of 2-minute
intervals.
Click [Export as CSV] at the lower left corner of the
screen to export the acquired operation data to a CSV
file.
Note: Regardless of the Operation Data Acquisition Mode
setting, operation data will be displayed at 2-minute
intervals.
Note: Depending on the number of units that have been
selected, the data display interval may be longer than
2 minutes.
WT07324X02
11