Mitsubishi Electric LAHN-1 Installation Manual page 6

4. Unit placement and clearances
Top View
Prevailing
Wind
Building Wall
Outdoor Units
5. Equipment supports
IMPORTANT!
The equipment supports must elevate the unit at least
The equipment supports must be an
open construction to minimize snow drifting
and/or ice formation during defrost.
6
air recirculation.
IMPORTANT!
If the unit is located in an area with continuous high winds,
the unit may require additional bracing.
Contact your local distributor for assistance.
CONCRETE PAD OR STRUCTURE
MINIMUM 3/8"
STAINLESS
STEEL OR EQUAL
STRENGTH TO AT
LEAST A GRADE 5
BOLT AND NUT