Related Manuals for Electrolux ECVW3062AS
Summary of Contents for Electrolux ECVW3062AS
- Page 2 1. SAFETY INSTRUCTIONS------------------------------------------------------------------- 2. ELECTRICAL REQUIREMENTS------------------------------------------------------------ 3. PARTS SUPPLIED---------------------------------------------------------------------------- 4. OPTIONAL ACCESSORIES--------------------------------------------------------------- 5. INSTALLING THE HOOD ------------------------------------------------------------------ 6. OPERATION----------------------------------------------------------------------------------- 7. SPECIAL FUNCTION----------------------------------------------------------------------- 8. CLEANING AND MAINTENANCE------------------------------------------------------ 9. TECHNICAL DATA-------------------------------------------------------------------------- 10.TROUBLE SHOOTING------------------------------------------------------------------- 11.ENVIRONMENTAL PROTECTION---------------------------------------------------- 12.WARRANTY INFORMATION-----------------------------------------------------------...
- Page 4 Always turn hood on when cooking over high heat...
- Page 5 To Reduce The Risk Of Fire And Electric Shock, Install This Rangehood Only With Integral Blowers Manufactured by Chinabest Home Appliance Co., Ltd, Model CTH03-128D.
- Page 6 Anti-Vibration Pad Wall Anchor Short screw M4 8 Wire Nut Cross socket Head Screw M4 14 Mounting Side Sponge strip Template Front Sponge strip 8' extension chimney Elux PN:EHW08X62AS 12' extension chimney Elux PN:EHW12X62AS 14' extension chimney Elux PN:EHW14X62AS Recirculation Kit with screws Elux PN: EHW62RKT...
- Page 7 Any wall modifications needed (i.e. support structure, wiring, ducting) must be completed prior to installation of the range hood. Tools Required (not included): Turn off electrical power at service entrance before wiring. Foil backed tape Wiring should enter the back wall at least 20"...
- Page 8 Using the dimensions or the template, mark the locations needed for support. Install horizontal supports between the wall studs at all mounting locations Flex metal ducts are not recommended Using supplied mounting template(Item 15) mark and drill 9 holes in the wall. Drill the holes according to the measured distances from the diagram(fig.
- Page 9 1. Install the Anti-Vibration Pad (Item 9) to the rear of the hood body (fig ). Peel off the backing and stick the sponge strips (Item 7,8) to the front and sides of the upper fan housing as shown in (fig 2.
- Page 10 Insert the upper chimney (Item 2.1) into the lower chimney (Item 2.2) from top to bottom (fig. Mount lower chimney (Item 2.2) on the range hood (Item 1). Fit the lower chimney (Item 2.2) to the lower bracket (Item 5) using 2 screws ) then tighten the (Item 14) by hand (fig.
- Page 11 EHW62RKT 1-800-944-9044 (USA) or 1-800-265-8352 (Canada) (fig. Fix the recirculation box to the wall with 2 sets of long screws (Item 11) and wall plugs (Item 10) (fig. Makeup Air Local building codes may require the "~11 " use of makeup air systems when using ventilation systems greater than specified CFM of air movement.
-
Page 12: Special Function
Side View It is recommended to use the range hood while cooking and for several minutes after cooking to reduce humidity and odors inside your kitchen space. Press the fourth time or the Power button to turn the light off. SPECIAL FUNCTION This product is equipped with a heat During this event, the vent fan speed can... - Page 13 All other servicing should be referred to a qualified technician. Parts and accessories not provided with your hood, or for replacement, can be purchased at www.electrolux.com or by calling 1-800-944-9044 (USA) or 1-800-265-8352 (Canada). Aluminum filter:...