Bosch Rexroth Hagglunds DUc MS2 Installation & Maintenance Manual page 66

66/88 Hägglunds DUc Drive unit | Maintenance and repair
Table 20: Maintenace chart
Absolute max. intervals for major
inspection and replacement
After the first 100 working hours
After 3 months or 500 working hours
Once every 3 months
Once every 6 months
Once every 12 months
I = Inspection
R = Replacement
*If the contamination indicator is tripped out, the filter must be changed immediately and the oil examined.
**For shock load applications, i.e. shredders, crushers etc.
Bosch Rexroth AB, Version 06.2020, RE 15326-WA
Rotating parts!
Risk of injury.
▶ Do not touch rotating parts inside the inspection hole see Fig. 55: Direction of
rotation. or in the zone of rotating parts.
… Check the cooling water flow
…
… Check that the cover of the DUc not are damaged …
Accumulator
-
-
I**
I
-
CAUTION
Air inlet Oil filters
- R*
- R*
- -
I -
- R*
Air breather
Hydraulic fluid
on tank
- -
- -
- -
- I
R -