Download Print this page
Nokia NSB-9 Series Disassembly And Assembly Instructions
Nokia NSB-9 Series Disassembly And Assembly Instructions

Nokia NSB-9 Series Disassembly And Assembly Instructions

Hide thumbs Also See for NSB-9 Series:

Advertisement

Quick Links

CCS Technical Documentation
NSB-9 Series Transceivers
Disassembly and Assembly
Instructions
Nokia Corporation.
Issue 1 04/03

Advertisement

loading

Summary of Contents for Nokia NSB-9 Series

  • Page 1 CCS Technical Documentation NSB-9 Series Transceivers Disassembly and Assembly Instructions Nokia Corporation. Issue 1 04/03...
  • Page 2 NSB-9 Company confidential Disassembly and Assembly Instructions CCS Technical Documentation Table of Content Page No Disassembly Instructions ....................3 Exchange of dome sheet ....................8 Nokia Corporation. Page 2 Issue 1 04/03...
  • Page 3 Note the torque of 17Ncm have to be used. correct position of the SRT-6, the tip should not touch the PWB. Now, the same procedure on the other side. Separate the modules. Nokia Corporation. Issue 1 04/03 Page 3...
  • Page 4 Function Keys are attached with four snaps to A- Remove Function Keys if needed. Use always new keys cover. Use SRT-6 to release the snaps. Take care not to in reassembly! damage the spring contacts. Nokia Corporation. Page 4 Issue 1 04/03...
  • Page 5 Note the right position of the LCD Module in LCD Separate the LCD Metal Frame from LCD Module and Metal Frame when assembling. Also take care not to protect the LCD window again. damage the LCD spring contacts of Radio Module. Nokia Corporation. Issue 1 04/03 Page 5...
  • Page 6 Remove the Vibra Motor from its guidance. Place the SRT-6 between the spring contacts and lift up the Antenna carefully. Do not damage the spring contacts and the Antenna Radiator when removing the Antenna. Nokia Corporation. Page 6 Issue 1 04/03...
  • Page 7 The Logo Bracket is attached with snaps to the B- Cover. Take care not to break the snaps when releas- ing the Bracket. After releasing of the snaps, the Logo Bracket can be removed. Nokia Corporation. Issue 1 04/03 Page 7...
  • Page 8 Press on the Radio Module evenly. Lift the Radio Module with the new Dome Sheet from Check that the Dome Sheet is correctly stuck to the the Jig. Radio Module. Do not damage the spring contacts of LCD. Nokia Corporation. Page 8 Issue 1 04/03...