Mounting USB keyboard
The following procedure describes the mounting of the IP65 keyboard on the keyboard tray based on a schematic drawing.
Suitable keyboards can be found in section "USB keyboards (Page 22)".
1. Place the USB keyboard on the keyboard tray
as shown.
2. Fasten the USB keyboard to the keyboard
tray with 4 screws M4x10 and torque 1.5 Nm.
Cleaning and maintenance
Clean the surface of the keyboard tray plate, the keyboard tray and the handles regularly with a mild commercially available
household cleaner.
Technical specifications
Certificates and approvals
After proper mounting according to this document, the certificates and approvals of the PRO device to which the PRO option
was added are applicable. In addition, observe the operating instructions of the PRO device.
Technical specifications
Weight of the handles PRO devices up to 22", without packaging
Weight of the handles for PRO devices larger than 24", without packaging
Weight of the keyboard tray without packaging
Weight of the keyboard tray plate without packaging
You can find additional technical specifications of the products by specifying the article number on the Internet
(https://support.industry.siemens.com/cs/ww/en/ps/td).
Extension Units - PRO Options
A5E43547142-AC, 02/2020
1.7 kg
1.8 kg
1.3 kg
1.4 kg
19