Initial Configuration - D-Link DNR-4020-16P User Manual

Section 2 - Installation
1. You can set up your NVR without using a PC by connecting a VGA or HDMI
display to the respective port on the back of the device. To control the
Graphical User Interface (GUI), connect a USB mouse to the USB port on
the front panel. After powering on the DNR-4020-16P for the first time,
the Login window will appear in the center of the screen.
2. Select your preferred language, and enter a user name and password that
will be used to access the management interface. Confirm the password
by retyping it.
3. In the Default channel password field, enter the password that will be
used to view and configure the device's channels. Click OK to continue.
4. On the next screen, reenter the admin password and click Login to access
the management interface.
D-Link DNR-4020-16P User Manual

Initial Configuration

9