Download From The Internet - Siemens SIMATIC Manual

The pin-out below shows only the connections relevant for the respective positio-
ning mode. The other connections are found in the Manual, Chapter "Wiring".
CONNECTOR X1:
Pin Name/Address
16 AO 0 (V)
17 AO 0 (A)
20 Mana
CONNECTOR X2:
Pin Name/Address
1 1 L+
2 DI+0.0
3 DI+0.1
4 DI+0.2
5 DI+0.3
6 DI+0.4
20 1 M
21 2 L+
28 DO+0.6
30 2 M
2nd step: Installing a sample project
You have two options of installing a sample project:
From CD:
Step Action
1 Start installation with a double-click on SE-
TUP.EXE in the SETUP folder of your CD.
2 Follow the instructions on the screen.

Download from the Internet:

Step Action
1 Open the sample project directory. Start the
installation program per double-click on SE-
TUP.EXE.
2 Follow the instructions on the screen.
Automation System S7-300, Getting Started – Analog
A5E00105537-01
Function
Voltage source, power unit
Current source, power unit
Analog ground
Function
24 V supply voltage for the inputs
Encoder signal A
Encoder signal B
Encoder signal N
Length measurement
Reference-point switch
Chassis ground
24 V supply voltage for the outputs
CONV_EN Power unit enable
Chassis ground
Result
The installation program starts.
Result
The installation program starts.
5