Advertisement
Quick Links
Recycler
52in, 60in, or 72in TURBO FORCE
Model No. 140-8016
Model No. 140-8017
Model No. 140-8018
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
© 2020—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
Kit
Description
No parts required
No parts required
No parts required
Left baffle
Bolt (3/8 x 1 inch)
Nut (3/8 inch)
Tapping bolt (3/8 x 1 inch)
Flange nut (3/8 inch)
Right baffle
Bolt (1/2 x 1 inch)
Nut (1/2 inch)
Washer (1/2 inch)
Left baffle
Bolt (3/8 x 1 inch)
Nut (3/8 inch)
Tapping bolt (3/8 x 1 inch)
Flange nut (3/8 inch)
Right baffle
Bolt (1/2 x 1 inch)
Nut (1/2 inch)
Washer (1/2 inch)
Left baffle
Bolt (3/8 x 1 inch)
Nut (3/8 inch)
Tapping bolt (3/8 x 1 inch)
Flange nut (3/8 inch)
Right baffle
Bolt (1/2 x 1 inch)
Nut (1/2 inch)
Washer (1/2 inch)
Register at www.Toro.com.
Form No. 3438-580 Rev A
®
Side Discharge Mower
Installation Instructions
Qty.
–
Prepare the machine.
–
Remove the existing blades.
–
Remove the existing baffles.
1
2
2
5
5
Install the baffles (for 52-inch decks).
1
1
1
1
1
2
2
5
5
Install the baffles (for 60-inch decks).
1
2
2
2
1
2
2
5
5
Install the baffles (for 72-inch decks).
1
2
2
2
Original Instructions (EN)
All Rights Reserved *3438-580* A
Printed in the USA
Use
Advertisement
Related Manuals for Toro 140-8016
Summary of Contents for Toro 140-8016
- Page 1 Form No. 3438-580 Rev A Recycler ® 52in, 60in, or 72in TURBO FORCE ® Side Discharge Mower Model No. 140-8016 Model No. 140-8017 Model No. 140-8018 Installation Instructions Installation Loose Parts Use the chart below to verify that all parts have been shipped.
-
Page 2: Preparing The Machine
Procedure Description Qty. Kicker Install the kickers (for 72-inch decks Bolt (3/8 x 1 inch) only). Locknut (3/8 inch) Note: Determine the left and right sides of the machine from the normal operating position. Preparing the Machine No Parts Required Procedure Perform the following procedure to prepare the machine for attaching the blower and finishing kit. - Page 3 Removing the Existing Blades No Parts Required Procedure Remove the existing blades from the spindles; refer to the Operator’s Manual. g316018 Figure 1 72-inch deck shown Removing the Existing 1. Cam lock 5. Bolt Baffles 2. Washer 6. Right adjustable flow baffle 3.
- Page 4 Installing the Baffles For 52-inch Decks Parts needed for this procedure: Left baffle Bolt (3/8 x 1 inch) Nut (3/8 inch) Tapping bolt (3/8 x 1 inch) Flange nut (3/8 inch) Right baffle Bolt (1/2 x 1 inch) Nut (1/2 inch) Washer (1/2 inch)
- Page 5 Procedure Note: All holes exist in the mower deck for installing the new baffles. Install the right baffle into the deck (Figure Loosely secure the right baffle to the top of the deck using 1 bolt (1/2 x 1 inch), 2 tapping bolts (3/8 x 1 inch), 1 nut (1/2 inch), 1 washer (1/2 inch), and 2 flange nuts (3/8 inch) as shown in Figure Loosely secure the right baffle to the rear baffle using 1 bolt (3/8 x 1 inch) and 1 nut (3/8 inch) as shown...
- Page 6 Installing the Baffles For 60-inch Decks Parts needed for this procedure: Left baffle Bolt (3/8 x 1 inch) Nut (3/8 inch) Tapping bolt (3/8 x 1 inch) Flange nut (3/8 inch) Right baffle Bolt (1/2 x 1 inch) Nut (1/2 inch) Washer (1/2 inch)
- Page 7 Procedure Note: All holes exist in the mower deck for installing the new baffles. Install the right baffle into the deck (Figure Loosely secure the right baffle to the top of the deck using 2 bolts (1/2 x 1 inch), 2 tapping bolts (3/8 x 1 inch), 2 nuts (1/2 inch), 2 washers (1/2 inch), and 2 flange nuts (3/8 inch) as shown in Figure Loosely secure the right baffle to the rear baffle using 1 bolt (3/8 x 1 inch) and 1 nut (3/8 inch) as shown...
- Page 8 Installing the Baffles For 72-inch Decks Parts needed for this procedure: Left baffle Bolt (3/8 x 1 inch) Nut (3/8 inch) Tapping bolt (3/8 x 1 inch) Flange nut (3/8 inch) Right baffle Bolt (1/2 x 1 inch) Nut (1/2 inch) Washer (1/2 inch)
- Page 9 Procedure Note: All holes exist in the mower deck for installing the new baffles. Install the right baffle into the deck (Figure Loosely secure the right baffle to the top of the deck using 2 bolts (1/2 x 1 inch), 2 tapping bolts (3/8 x 1 inch), 2 nuts (1/2 inch), 2 washers (1/2 inch), and 2 flange nuts (3/8 inch) as shown in Figure Loosely secure the right baffle to the rear baffle using 1 bolt (3/8 x 1 inch) and 1 nut (3/8 inch) as shown...
- Page 10 Installing the Kickers For 72-inch Deck Only Parts needed for this procedure: Kicker Bolt (3/8 x 1 inch) Locknut (3/8 inch) Procedure Remove the existing bolts and nuts in the holes for the kickers (Figure Install the new kickers to the mower deck in the locations shown in Figure Secure the kickers using 4 carriage bolts (5/16...
- Page 11 Notes:...