Sealey Auto Service Series Instructions Manual page 3
Bodyshop/workshop headlamp beam setter
Hide thumbs
Also See for Auto Service Series:
- Manual (38 pages) ,
- Instructions manual (21 pages) ,
- Instructions (3 pages)
Advertisement
ASYMMETRICAL DIPPED BEAM
fig. 5
Correct projection on panel.
SYMMETRICAL DIPPED BEAM
fig. 6
When testing symmetrical dipped beams
the projection on the plate should be a
horizontal line.
MAIN BEAM
fig. 7
It is necessary to obtain a strong bright zone at the
centre of the plate, where the black spot is located.
7.
THE LUXMETER
In addition to the numerically calibrated scales the luxmeter has a colour coded scale for main beam intensity which should be read as follows:
Main Beam
1.
Indicator at RED/GREEN (BAD/GOOD) limit: Acceptable for vehicles travelling under 30mph (48km/h) and motorcycles.
2.
Indicator at the centre of GREEN (GOOD): Acceptable for vehicles travelling over 30mph (48km/h).
3.
Indicator on BLUE (HALOGEN): Acceptable for vehicles with halogen headlights.
HBS2001 - 2 - 061103
Advertisement
