Advertisement
Step 1 - Set system switches/jumpers
Step 2 - Install memory modules
Step 3 - Install the CPU
Step 4 - Install expansion cards
Step 5 - Connect cables and power supply
Step 6 - Set up BIOS features
Step 7 - Set up software utilities
CAUTION: If you use an electric drill to install this Mainboard
on your chassis, please wear a static wrist strap.
The recommended electric drill torque is from 5.0 to 8.0 kg/
cm to avoid damaging the chips' pins.
Installation
Chapter 2
Installation
2 - 1
Advertisement
