Electrolux XBM20 Instruction Manual page 2

GB
ASSEMBLING THE TABLE FOR BEATERSXBM20/
INTRODUCTION
• Designed to hold the 20 litre beaters, this stainless steel table with
storage shelf provides the user with a functional workpost.
INSTALLATION
• Making the table stable and horizontal:
- The table feet are screwed fully home into their tube (table height
480 mm).
- To compensate for any differences in height, bring each foot out
of its tube separately (10 mm adjustment maximum).
• Proceed as follows:
- Place the table in the desired location.
- Identify which feet need adjustment.
- Tip or lay the table down.
- Unscrew the foot/feet identifi ed previously (size 13 socket span-
ner).
- Adjust the foot to a suitable height and lock the screw, which will
expand and block the foot in the tube.
- Check that the table is suffi ciently stable and horizontal.
INSTRUCTIONS MANUAL
XBE20/BM 20/EM20/BE 20/EL20
• Fixing the table to the fl oor (fi g. 1).
- Unblock the holes for fi xing the feet to the fl oor.
- Counter drill or mark the place for the 4 holes in the fl oor.
- Install plugs for screws ø8 maximum, length 30 minimum (screws
and plugs not supplied).
Fig. 1
• Attaching the beater to the table (fi g. 2).
- Align the 4 attachment holes with those on the table top.
- Attach the machine to the table with the screws supplied.
To fi x the XBM and XBE Mixers, remove the two front adjustable feet.
To each fi xation holes, remove the hupper front cover of the tube.
Fig. 2
BM/BE20-EM/EL20
• To check the stability of the beater - table assembly:
- Fit the paddle to the beater.
- Operate the machine right up to high speed.
2/6
XBM/XBE20