Philips 9000 Series Manual page 29

Problem
The appli-
ance does not
shave as well as
it used to.
I replaced the
shaving heads,
but the display
still shows the
replacement
reminder.
22_002_5883_1_Booklet Lux_A6_v2.indd 29
Possible cause
The shaving unit is
soiled or damaged
to such an extent
that the motor
cannot run.
The shaving heads
are damaged or
worn.
Hairs or dirt obstruct
the shaving heads.
You have not reset
the appliance.
English
Solution
Clean the shaving heads
thoroughly or replace
them. Also see 'Hairs or dirt
obstruct the shaving heads'
for a detailed description of
how to clean the shaving
heads thoroughly.
Replace the shaving heads
(see 'Replacement').
Clean the shaving
heads in the regular
way (see 'Cleaning and
maintenance') or clean
them thoroughly.
To clean the shaving
heads thoroughly, remove
the shaving heads
from the shaving head
holder one by one (see
'Replacement'). Then
separate the cutter from
its guard and rinse each
matching set under the
tap. After rinsing, place
the cutter back into its
corresponding guard.
Finally, put the shaving
heads back into the
shaving head holder
(see 'Replacement').
Reset the appliance by
pressing the on/off button
for approx. 7 seconds
(see 'Replacing the
shaving heads').
29
13/05/16 10:52