Getting Started; Product Details; Powering On And Off; Charging - Kenwood KCA-HX7C Instruction Manual

Motorcycle bluetooth camera and communication system
Hide thumbs Also See for KCA-HX7C:
Table of Contents

Advertisement

GETTING STARTED

Product Details

Antenna
Camera Button
Lens
Field of view: 125 degrees
Aperture: F/2.4
microSD Card Slot
10
GETTING STARTED

Powering On and Off

Press the Jog Dial and the Phone Button for 1 second to power on. Tap the Jog
Dial and the Phone Button to power off.
* When the main unit is turned on, the camera turns on and video recording starts
([Auto Start Recording]).

Charging

Jog Dial
The headset can be charged using many common methods via the supplied USB
power & data cable. The LED turns red while the headset is charging and turns
blue when it is fully charged. Depending upon the charging method, the headset
will be fully charged in about 2.5 hours. The headset is compatible with 5 V input
Status LED
USB-charged devices only.
NOTE
• Using When Plugged Into a Power Source (USB-charging adapter or Powerbank)
DC Power
When you want to record long videos and time lapse events, connect the KCA-HX7C to
Charging &
a power source and then use it.
Firmware Upgrade
Port
– If you connect the KCA-HX7C to the Powerbank while the camera is on, the KCA-
HX7C will use the electricity stored in the Powerbank but the battery will not charge.
Phone Button
– If you connect the KCA-HX7C to the Powerbank while the camera is off, you can use
the KCA-HX7C while it charges.
Speaker and
Microphone Port

Advertisement

Table of Contents
loading

Table of Contents