Source Button; Menu Button; Number Buttons - Sony CDX-GT820IP Operating Instructions Manual

D SOURCE button
To power on; change the source (Radio/CD/
iPod/AUX)* 1 .
E Display window
F OPEN button page 6, 7
G
(BACK) button page 10
To return to the previous display.
H Receptor for the card remote
commander
I SEEK –/+ buttons
CD/iPod:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
J MODE button page 12, 13
To select the radio band (FM/AM)*
the play mode of iPod.
K SCRL (scroll) button
To scroll the display item.
L Number buttons
CD/iPod:
(1): REP page 12, 14
(2): SHUF page 12, 14
(3)/(4): ALBUM –/+
To skip albums (press); skip albums
continuously (press and hold).
(6): PAUSE
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
M DSPL (display) button page 12
To change display items.
N AUX input jack page 17
To connect a portable audio device.
O RESET button page 4
P Z (eject) button page 7
To eject the disc.
Q Disc slot page 7
To insert the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 5).
r MENU button
To enter menu.
ql ENTER button
To apply a setting.
w; < (.)/, (>) buttons
To control CD/radio/iPod, the same as
(SEEK) –/+ on the unit.
Setup, sound setting, etc., can be operated by
< ,.
wa VOL (volume) +/– button
To adjust volume.
ws ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
wd SOUND button
To enter sound setting.
1 ; select
x LIST/CAT*
To list up (Radio); enter the Quick-BrowZer
mode (CD/iPod).
wg M (+)/m (–) buttons
To control CD/iPod, the same as (3)/(4)
(ALBUM –/+) on the unit.
Setup, sound setting, etc., can be operated by
M m.
*1 In the case of a CD/MD changer, HD radio tuner or
SAT tuner being connected; when (SOURCE) is
pressed, the connected device ("MD," "HD," "XM" or
"SR") will appear in the display, depending on
which device is connected. Furthermore, if
(MODE) is pressed, you can switch the changer,
HD radio tuner band or SAT tuner band.
*2 When the SAT tuner is connected.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
2 button
9