Adjusting the temperature in
the MasterFresh zone (dry
compartment)
In Settings mode , use the
and sensor controls to
select
MasterFresh
confirm your selection.
Use the and sensor controls to
select the desired temperature and
touch OK to confirm your selection.
Touch the sensor control if you
wish to terminate the process.
The segment bar displays 5 segments;
the temperature is adjusted in
increments of approx. 1 °C.
The factory default setting for the
temperature in the dry compartment is
0 °C.
and select OK to
Selecting additional settings
Switching Eco mode on or
off
Eco mode
is useful when you go on
holiday, for example, if you do not wish
to switch off the refrigeration appliance
completely or do not need a high
degree of cooling. Energy consumption
in
Eco mode
is lower than in normal
operation.
The refrigerator section is thereby
regulated to a temperature of 6 °C and
the dry compartment in the
MasterFresh zone to approx. 1 °C.
If the SuperCool function is switched
on, this will be automatically switched
off when
Eco mode
In Settings mode , use the and
sensor controls to select
and select OK to confirm your
selection.
Use the and sensor controls to
switch the
Eco mode On
select OK to confirm your selection.
Only the changed temperature on the
display indicates that
switched on.
Tip: You can also switch off the
mode
function by directly adjusting the
temperature (see "The correct
temperature – Setting the
temperature").
Storing food at a temperature of 6 °C
for an extended period of time may
impair the shelf life and quality of the
food.
is selected.
Eco mode
or
Off
and
Eco mode
is
Eco
63