Table of Contents
Advertisement
corresponding cooking zone display.
Blinking is active for 3 seconds and
allows further adaptations of the
settings before power reduction.
Switching the bridge zone on
Touch the front left and rear left heater
selection key simultaneously. There is
a static dot indication
on the left heaters displays and
displays Show the 'b' and 'r'. And the
blinking dot on the all other
displays turned off..
Select the temperature setting by using
the increase heat setting with right side
of the sliding button
or decrease heat setting with left side
of the sliding button.
The bridge element is ready to cook.
For quickest boil time, select desired
cooking level and then
touch the P key to activate Boost
function.
Switching the bridge zone off
Bridge element shall be selected by
pressing the rear left or front left heater
selection key with using
left side of the sliding button key, turn
the level down to ''0''. If the bridge
cooking zone is hot, "H" will
be displayed .
Smart Pause
The Smart Pause, when activated,
reduces the power of all burners that
have been switched on.
If you then deactivate the Smart
Pause, the heaters will automatically
return to the previous level.
If the Smart Pause is not de-activated,
the cooktop will turn off after 30
minutes.
Press (
) to activate Smart Pause.
The power for the activated heater(s)
will reduce to level 1 and "II" will
appear on all the displays.
Press (
) again to deactivate
Smart Pause. "II" will disappear and
the heaters will now run at the level
previously set.
EN
Advertisement
Table of Contents
